|
|
| BBTJ0006 |
BombProof Block Brackets for '00-'06 Jeep TJ's, LJ's w/ 4.0L engines
The factory block brackets are retained w/ 3 bolts, We have seen many cases where the bolts come loose or break causing the engine to fall. Sometimes this will also damage the block (Threaded Bosses). We have come up with a replacement bracket that will bolt on using 7 existing threaded holes on the side of the block.
*Note: Will not work with aftermarket headers
Download Instructions Here: BBTJ0006.pdf
|
|
| BBTJ9799 |
BombProof Block Brackets for '97-'99 Jeep TJ's w/ 4.0L engines
The factory block brackets are retained w/ 3 bolts, We have seen many cases where the bolts come loose or break causing the engine to fall. Sometimes this will also damage the block (Threaded Bosses). We have come up with a replacement bracket that will bolt on using 7 existing threaded holes on the side of the block.
*Note: Will not work with aftermarket headers
Download Instructions Here: BBTJ9799.pdf
|
|
| JM600 |
1997 - 2006 Jeep TJ / LJ - This "Torsion" Rubber style mount will clamp the engine in place better then the stock mounts do, however, they will not transmit vibration like polyurethane mounts do!
Download Instructions Here: JM600.pdf
|
|
| JM600L |
1997 - 2006 Jeep TJ / LJ w/ 4.0L or 4.2L engines, With a One Inch Body Lift Kit installed. These mounts are the same as our new "Torsion" rubber BombProof"mounts, except that they are designed to "Lift" the engine one inch. These mounts work great for the TJ owner who wants to help correct the rear drive shaft angle, by leaving the stock crossmember in the stock location. They also work with the TeraFlex BellyUp crossmember.
Download Instructions Here: JM600L.pdf
|
|
| JM603 |
1997-2004 TJ 2.5L New-"Torsion" Rubber style (Noticeable vibration w/ 2.5L engine)
|
|
| JM603L |
1997-2004 TJ 2.5L WITH 1" BODY LIFT ONLY! New-"Torsion" Rubber style (Noticeable vibration w/ 2.5L engine)
|
|
| JM700 |
Generation III V-8 and V-6 - 1997-2006 Jeep® Wrangler, all.
Download Instructions Here: JM700.pdf
|
|
| JM25840 |
1997 - 2006 Jeep TJ / LJ with 6 cylinder (4.0L & 4.2L) engines. Mounts the engine is stock location. Bare steel, no paint.
Download Instructions Here: JM25840.pdf
|
|
| JM25840Z |
Same as above, Gold Zink plated
|
|
| JM25840L |
1997 - 2006 Jeep TJ / LJ 4.0L or 4.2L engines, and a One Inch Body Lift Kit installed. These mounts are the same as our standard BombProof mounts, except that they are designed to "Lift" the engine one inch. These mounts work great for the TJ owner who wants to help correct the rear drive shaft angle, by leaving the stock crossmember in the stock location. They also work with the TeraFlex BellyUp crossmember. Bare steel, no paint.
Download Instructions Here: JM25840L.pdf
|
|
| JM25840LZ |
Same as above, gold zinc.
|
|
|
