|
|
| JM25840 |
1987&UP Jeep® YJ with 6 cylinder (4.0L & 4.2L) engines. Mounts the engine is stock location. Bare steel, no paint.
Download Instructions Here: JM25840.pdf
|
|
| JM25840Z |
Same as above, gold zinc..
|
|
| JM25840L |
1987&UP Jeep® YJ 4.0L or 4.2L engines, and a One Inch Body Lift Kit installed. These mounts are the same as our standard BombProof mounts, except that they are designed to "Lift" the engine one inch. These mounts work great for the YJ owner who wants to help correct the rear drive shaft angle, by leaving the stock crossmember in the stock location. They also work with the TeraFlex BellyUp crossmember. Bare Steel, no paint.
Download Instructions Here: JM25840L.pdf
|
|
| JM25840LZ |
Same as above, gold zinc.
|
|
| JM400 |
1987-1995 Jeep® YJ Wrangler Converting to Chevy V-8 (small or big block) engines. The factory motor mounts must be removed from the frame to install these mounts. They are indexed to factory holes in the frame so line-up is a breeze. These mounts must be welded to the frame, so they come bare steel, no paint. They are set-up to offset the engine to the passenger side 1 inch, so a T-case with a drivers side front drive shaft must be installed (231 or 241).
Download Instructions Here: JM400.pdf
|
|
| JM600 |
All Model Jeep YJ's -This "Torsion" Rubber style mount will clamp the engine in place far better then the stock junk mounts do, however, they will not transmit vibration like polyurethane mounts do! Zink Plated
Download Instructions Here: JM600.pdf
|
|
| JM600L |
All Model Jeep YJ's 4.0L or 4.2L engines, With a One Inch Body Lift Kit installed. These mounts are the same as our new "Torsion" rubber "BombProof" mounts, except that they are designed to "Lift" the engine one inch.
Download Instructions Here: JM600L.pdf
|
|
| JM601 |
1987-1990 YJ 2.5L "Torsion" Rubber style. Zink Plated (Noticeable vibration w/ 2.5L engine)
Download Instructions Here: JM601.pdf
|
|
| JM601L |
1987-1990 YJ 2.5L WITH 1" BODY LIFT ONLY. "Torsion" Rubber style. Zink Plated (Noticeable vibration w/ 2.5L engine)
Download Instructions Here: JM601L.pdf
|
|
| JM602 |
1991-1995 YJ 2.5L "Torsion" Rubber style. Zink Plated (Noticeable vibration w/ 2.5L engine)
Download Instructions Here: JM602.pdf
|
|
| JM602L |
1991-1995 YJ 2.5L WITH 1" BODY LIFT ONLY! "Torsion" Rubber style. Zink Plated (Noticeable vibration w/ 2.5L engine)
Download Instructions Here: JM602L.pdf
|
|
| BBYJ9195 |
BombProof Block Brackets for 91-95 YJ's with the 4.0L engines Note: These ship bare steel.
Download Instructions Here: BBYJ9195.pdf
|
|
*Some 87-95 YJ's must do some cutting-grinding on frame and factory block mount to fit.
Mounts shown at right are with no paint , all mts. come gold zinc plated.
|
