5/8"-18 Left Hand Thread Jam Nut
5/8"-18 Right Hand Thread Jam Nut
Tired of breaking the grease zerk off your bolts? We have the answer with our new "Zerk Protectors" for greasable shackles.Sold individually.
These are replacement aluminum bushings for Shackle Reversal System Front Bracket (87-95 YJ). Rather you are moving your shackle reversal system to a new frame or just somehow wore the bushings out. The aluminum bushings are sold individually.Below are installation instructions to 8795-50 and 8795-5.
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle. T500 Axle Plates for sold each. So order 2 per TB500 traction bar. FITS: CJ-7...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Boulder Bushings work great on control arms , traction bars, or where ever you need an adjustable bushing assembly. These come complete with bushings, inner sleeve (specify for 1/2" or 9/16" bolt) and jam nut. Bolt not included.
Bolt on, drilling and tapping of knuckle required. No hardware or instructions provided.