Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Main Eye Kit (87-95 YJ) Front & Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Shackle Bolts and Bushing Kit for Jeep Wrangler YJ (1987-95) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt Sold individually.
Shackle Side Plate 5 1/4" Boomerang Plate - Zinc Plated
Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement.Zinc plated, sold individually.
3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt
3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt Sold individually.
Shackle Side Plate 4" CTC Straight Plate - Zinc Plated
Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement. Zinc plated, sold individually.
Shackle Side Plate 4 3/4" Boomerang Plate - Zinc Plated
Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement. Zinc plated, sold individually.
Polyurethane Bushing - 1"x1/2"x1-1/2"
1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long used for 2-1/2" wide stock CJ rear springs at shackle end and shackle hanger. Sold each.
1" OD x 3" Long Drilled Sleeve for 1/2" Bolt for our shackle side plates
1" OD x 3" Long Drilled Sleeve with a hole for a 1/2" Bolt for spacing our shackle side plates. The sleeve is used as the center bolt spacer in our LS9034, LS9039, LS9040, LS9081, & LS9091 lubeable shackle kits. Sold individually.
Grade 5 Zerked Bolt 1/2"-13 x 4"
Want to build your own or just replace existing bolts? Here you go. Sold individually.