Polyurethane Replacement Bushings

We have a large variety of bushings for all you replacement or building projects. Check them all out. Made in the USA!

Showing 1–12 of 26 results

Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Main Eye Kit (87-95 YJ) Front & Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Shackle Bolts and Bushing Kit for Jeep Wrangler YJ (1987-95) Front or Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Polyurethane Bushing - 1-1/2"x3/4"x1-1/2"

1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long.  Used for 2-1/2" wide YJ springs at main eye and some aftermarket springs at the shackle end. Used at main eye of CJ rear springs 2-1/2" wide.  Also used in our JM25840 & JM25840L motor mounts. Sold each.

Shackle Side Plate 5 1/4" Boomerang Plate - Zinc Plated

Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement.Zinc plated, sold individually.

Torque Arm Mount for Jeep CJ (1972-86) Jeep Wrangler YJ (1987-95)

Replace the stock rubber transmission and torque arm mounts with these black polyurethane units. They are not affected by oil or grease, road grime, or salt. They will tighten up the way your Jeep feels and help to hold the drive train in place. Fits 1972-1995 Jeeps. Polyurethane....

Polyurethane Bushing: 1-3/4"x3/4"x1-1/2"

1-3/4" x 3/4" polyurethane bushing x 1.450" long, used for the following motor mounts: JM100 JM200 JM301 JM400 JM500 JM700

Shackle Side Plate 4" CTC Straight Plate - Zinc Plated

Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement. Zinc plated, sold individually.

Shackle Side Plate 4 3/4" Boomerang Plate - Zinc Plated

Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement. Zinc plated, sold individually.