Polyurethane Replacement Bushings

We have a large variety of bushings for all you replacement or building projects. Check them all out. Made in the USA!

Showing 1–12 of 32 results

Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Polyurethane Bushing: 1-3/4"x3/4"x1-1/2"

1-3/4" x 3/4" polyurethane bushing x 1.450" long, used for the following motor mounts: JM100 JM200 JM300 JM400 JM500 JM700

Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Shackle Bolts and Bushing Kit (87-95 YJ) Front or Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Polyurethane Bushing - 1-1/4"x3/4"x1-1/2"

1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long used for 2-1/2" wide YJ springs at shackle end and shackle hanger. Sold each.

Main Eye Kit (87-95 YJ) Front & Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Shackle Side Plate 5 1/4" Boomerang Plate - Zinc Plated

Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement.Zinc plated, sold individually.

Tubing: 1-1/2"x.120" (2-1/4" long)

All universal bushing assemblies come complete with two polyurethane bushing halves, outer steel tubing, inner sleeve, mounting bolt and locking nut. Available only in black polyurethane! These universal bushing assemblies are handy for the home fabricator. For varied applications such as custom motor mounts (same as used in...

Tubing: 1-1/4"x.095" (2" long)

All universal bushing assemblies come complete with two polyurethane bushing halves, outer steel tubing, inner sleeve, mounting bolt and locking nut. Available only in black polyurethane! These universal bushing assemblies are handy for the home fabricator. For varied applications such as custom motor mounts (same as used in...

Polyurethane Bushing - 1-1/2"x3/4"x1-1/2"

1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long used for 2-1/2" wide YJ springs at main eye and sold aftermarket shackle end. Sold each.