1976-1986 Jeep CJ Parts & Accessories

Customize you trusty Jeep CJ with M.O.R.E.'s "RockProof" products. After installing our parts on your CJ7 or CJ8, you'll hit your favorites trails with greater confidence knowing your Jeep is up for the challenge. Our parts also carry a Lifetime Warranty.

Showing 1–32 of 64 results

Steering Box Mount H.D. (76-86 CJ)

Fits 1976-1986 Jeep® CJ-5, CJ-7, CJ-8 The stock Jeep® CJ steering box mounts are stamped steel (1/8"), and not known for their strength. If you have tires larger then 33", and a front locker, the steering brace above is not enough to hold the box in place. This...

$113.85 – $125.42 Select optionsSelect options

Steering Box Mount H.D. (76-86 CJ)

Fits 1976-1986 Jeep® CJ-5, CJ-7, CJ-8 M.O.R.E. Has answered the problem with the steering when you move your front axle forward. This New Heavy Duty steering box bracket will move your steering gear forward 1- 1/4" . This will keep the drag link from interfering with the tie...

$115.96 – $122.26 Select optionsSelect options

Steering Brace (76-86 CJ)

Fits 1976-1986 Jeep® CJ-5, CJ-7, CJ-8 M.O.R.E.'s steering brace is powder coated and the clamp is zinc plated gold. All mounting hardware is included, and the steering box brace is just a simple bolt-on design. No drilling or mods are required (for most applications). This brace ties your...

"Bomb Proof" Motor Mount Kit (pre-99 CJ with AMC 6-cyl)

Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...

$246.23 – $276.35 Select optionsSelect options

Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Axle Off-Set Plate for 2-1/2" Wide Springs

Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4” or 1” forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...

Lubeable Shackles (76-86 CJ) Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Rear Cross Member Replacement (1976-1986 CJ)

MORE's rear cross member replacement for 1976-1986 Jeep CJ is laser cut and CNC-bent from 3/16" plate steel for durability and a precise-fit. Bent and ready to weld in! FITS: 1976-1986 Jeep CJ

Shackle Hanger (76-86 CJ) Front

FITS: 1976-1986 Jeep CJs, front pair. For 2" wide CJ width springs. 1" diameter bushings. Sold in pairs.

"Bomb Proof" Motor Mount Kit (CJ with AMC 8-cyl)

Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...

$306.66 – $316.59 Select optionsSelect options

Shackle Hanger (76-86 CJ) Rear

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

Frame Plates - Rear ('76-'86 CJ5, CJ7, CJ8)

Rear plates are 3-1/2 ft. long. Start at the rear body mount outrigger and go up over the rear axle to crossmember. Rear plates come with two lower plates to reinforce the shackle hanger area of the frame. Set of 4 pieces Reinforce the frame of your Jeep...

"Bomb Proof" Motor Mount Kit (CJ with Chevy V6/V8)

Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...

Shackle Hanger (76-86 CJ) Rear

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

Traction Bar for Rear Axle (CJ7, YJ)

Have you got a Jeep with the rear leaf Springs Over the Axle (S.O.A.), and the rear spring "wrap" is causing problems? We have the answer for you! This H.D. Traction Bar will prevent all spring wrap, without limiting travel or flexibility. The Johnny Joint® mounted shackle attaches...

Lubeable Shackles (76-86 CJ) Front

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Shackle Reversal System (76-86 CJ with YJ Springs)

This system has all of the features as the 7686-1, however it comes with wider tubes and bushings to insert in the frame so you can install the wider Jeep® YJ Wrangler springs. Why, you ask? The Wrangler springs typically have a softer spring rate than CJ's adding...

$209.65 – $297.11 Select optionsSelect options

"Bomb Proof" Motor Mount Kit (76-86 CJ with Ford V8)

Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...

Shackle Hanger (76-86 CJ) Front

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt

3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt Sold individually.

Shackle Reversal System (76-86 CJ)

Stock width 2" springs are required. The new front pivot brackets are fully welded, and ready to bolt into existing holes in your CJ frame. Spacer plates are provided for the purpose of different winch mounting possibilities, and/or if you choose to use our Frame Plates (FP100 or...

$203.86 – $291.31 Select optionsSelect options

Frame Plates - Front ('72-'86 CJ)

These start at the front bumper and extend past the first body mount outrigger. Front pair. Reinforce the frame of your Jeep CJ with these 3/16" thick steel plates. Pre-punched holes line up perfectly, and their contour cut to the shape of the frame. Weld them on the...

Transmission Mount (66-95 YJ, CJ)

Do the shift levers "jump" all around in your Jeep? The transmission mount is probably worn out. Replace it with our Polyurethane Mount. It's not affected by oil, grease or road grime. It will tighten up the way your vehicle feels and it's the perfect complement with our...

Jeep Wrangler CJ Hide A Step: Powder Coated

Now it is easy to get into your Jeep with those large tires! This affordable step is easy to install, and has a convenient quick-disconnect feature. This step lowers your "step up" 11 inches. Quick disconnect: pull 2 pins and the Hide-A-Step will remove easy for when you...

Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Tie Rod & Drag Link (72-81 CJ)

Fits 1972-1981 CJs with Dana 30 front axle. You can now replace the stock wimpy tie rod and drag link on your 1972-1986 Jeep® CJ with our Heavy Duty Tie-Rod/Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and...

$339.76 – $361.83 Select optionsSelect options

Shackle Side Plate 5 1/4" Boomerang Plate - Zinc Plated

Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement.Zinc plated, sold individually.

Full Width Axle Shackle Reversal System (76-86 CJ with 2-1/2" YJ Springs)

Installing a Jeep S.R.S. (shackle reversal system) allows the front suspension to travel in a much more natural action when the spring compresses, and our full width axle kits work seamlessly in conjunction with this system. In stock form when the front tire comes in contact with an...

$463.31 – $488.69 Select optionsSelect options

"Rock Proof" Front Bumper: High Clearance (76-86 CJ)

Looking for a bumper for your Jeep® that protects the fenders, holds a winch, and looks great? Then you need one of our "Rock Proof" off-road bumpers. These are not your average aftermarket Jeep bumpers however. Most manufacturers of aftermarket Jeep bumpers simply make their products from a...

$777.62 – $856.42 Select optionsSelect options

"Bomb Proof" Block Brackets (CJ)

Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...

Hide-A-Step: Silver (CJ)

Now it is easy to get into your Jeep with those large tires! This affordable step is easy to install, and has a convenient quick-disconnect feature. • This step lowers your "step up" 11 inches. • Quick disconnect: pull 2 pins and the Hide-A-Step will remove easy for...

3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt

3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt Sold individually.