Lubeable Shackles for Jeep CJ (1976-86) Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Rear Shackle Hanger - Heavy Duty Stock Replacement for Jeep CJ (1976-86)

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle. Replace the stock shackle hangers on your Jeep® with these heavy duty units. The CJ units are...

Rear Cross Member Replacement for Jeep CJ (1976-86)

MORE's rear cross member replacement for 1976-1986 Jeep CJ is laser cut and CNC-bent from 3/16" plate steel for durability and a precise-fit.Bent and ready to weld in!FITS: 1976-1986 Jeep CJ

Rear Shackle Hanger for Jeep CJ (1976-86) for YJ Bushings, Heavy Duty

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for YJ springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

"Bomb Proof" Motor Mount Conversion Kit Chevy LS (Gen III & IV) for Jeep CJ (1972-86)

Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...

Frame Plates - Front Side for Jeep CJ (1972-86)

These start at the front bumper and extend past the first body mount outrigger. Front pair. Reinforce the frame of your Jeep CJ with these 3/16" thick steel plates. Pre-punched holes line up perfectly, and their contour cut to the shape of the frame. Weld them on the...

Front Shackle Hanger System for Jeep CJ (1976-86) with YJ Springs, Includes YJ bushings

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Moves your front...

Shackle Reversal System for Jeep CJ (1976-86) with 2.5" YJ Springs

This system has all of the features as the 7686-1, however it comes with wider tubes and bushings to insert in the frame so you can install the wider Jeep® YJ Wrangler springs. Why, you ask? The Wrangler springs typically have a softer spring rate than CJ's adding...

Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go.Sold individually.

Frame Plates - Rear Side for Jeep CJ (1976-86)

Rear plates are 3-1/2 ft. long. Start at the rear body mount outrigger and go up over the rear axle to crossmember. Rear plates come with two lower plates to reinforce the shackle hanger area of the frame. Set of 4 pieces Reinforce the frame of your Jeep...

Shackle Reversal System for Jeep CJ (1976-86) with 2" CJ Springs

Stock width 2" springs are required. The new front pivot brackets are fully welded, and ready to bolt into existing holes in your CJ frame. Spacer plates are provided for the purpose of different winch mounting possibilities, and/or if you choose to use our Frame Plates (FP100 or...

Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) Front or Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...