Steering Box Mount H.D. for Jeep CJ (1976-86)
The stock Jeep® CJ steering box mounts are stamped steel (1/8"), and not known for their strength. If you have tires larger then 33", and a front locker, the steering brace above is not enough to hold the box in place. This Heavy-Duty Steering Box Mount is made...
Steering Brace for Jeep CJ (1976-86)
M.O.R.E.'s steering brace is powder coated and the clamp is zinc plated. All mounting hardware is included, and the steering box brace is just a simple bolt-on design. No drilling or mods are required (for most applications). This brace ties your power steering box to the passenger frame...
Steering Box Mount H.D. for Jeep CJ (1976-86)
M.O.R.E. Has answered the problem with the steering when you move your front axle forward. This New Heavy Duty steering box bracket will move your steering gear forward 1- 1/4". This will keep the drag link from interfering with the tie rod and like the standard bracket will...
Front Shackle Hanger for Jeep CJ (1976-86) Heavy Duty Front Stock Replacement
FITS: 1976-1986 Jeep CJs, front pair. For 2" wide CJ width springs. Uses the stock 1" diameter bushings. Sold in pairs.
Axle Off-Set Plate for 2-1/2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
"Bomb Proof" Motor Mount kit for Jeep CJ (1972-86) with AMC 8-cyl
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) with Military Springs Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
"Bomb Proof" Motor Mount Kit for Jeep CJ (1972-86) with AMC 6-cylinder 4.2L / pre-99 4.0L
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
Steering Kit: Tie Rod & Drag Link for Jeep CJ (1982-86) Wide Track
You can now replace the stock wimpy tie rod and drag link on your 1972-1986 Jeep® CJ with our Heavy-Duty Tie-Rod/Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end....
"Bomb Proof" Motor Mount Conversion Kit Chevy V6/V8 for Jeep CJ (1972-86)
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
Rear Shackle Hanger - Heavy Duty Stock Replacement for Jeep CJ (1976-86)
These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle. Replace the stock shackle hangers on your Jeep® with these heavy duty units. The CJ units are...
Lubeable Shackles for Jeep CJ (1976-86) Front
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...