Steering Box Mount H.D. for Jeep CJ (1976-86)
The stock Jeep® CJ steering box mounts are stamped steel (1/8"), and not known for their strength. If you have tires larger then 33", and a front locker, the steering brace above is not enough to hold the box in place. This Heavy-Duty Steering Box Mount is made...
Steering Brace for Jeep CJ (1976-86)
M.O.R.E.'s steering brace is powder coated and the clamp is zinc plated. All mounting hardware is included, and the steering box brace is just a simple bolt-on design. No drilling or mods are required (for most applications). This brace ties your power steering box to the passenger frame...
Steering Box Mount H.D. for Jeep CJ (1976-86)
M.O.R.E. Has answered the problem with the steering when you move your front axle forward. This New Heavy Duty steering box bracket will move your steering gear forward 1- 1/4". This will keep the drag link from interfering with the tie rod and like the standard bracket will...
Steering Kit: Tie Rod & Drag Link for Jeep CJ (1982-86) Wide Track
You can now replace the stock wimpy tie rod and drag link on your 1972-1986 Jeep® CJ with our Heavy-Duty Tie-Rod/Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end....
Steering Kit: Tie Rod & Drag Link for Jeep CJ (1972-81) Narrow Track
You can now replace the stock wimpy tie rod and drag link on your 1972-1986 Jeep® CJ with our Heavy-Duty Tie-Rod/Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end....
Steering Box Clamp
If you want to fabricate your own Steering Brace, then you can purchase a M.O.R.E. Steering Box Clamp. Zinc Plated (clamp and hardware only)
Rod End: 5/8" -18 Left Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 5/8" -18 Right Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Steering Link Kit: Drag Link for Jeep CJ (1982-86)
Fits 1982-1986 CJs with Dana 30 front axle, wide track. You can now replace the stock wimpy drag link on your 1972-1986 Jeep® CJ with our Heavy Duty Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right...
5/8 High Deflection Misalignment Washer
5/8" High Deflection Misalignment Washer Only. 5/8" bolt hole x 5/16" tall Sold individually.
Rod End: 3/4" -16 Left Hand Thread with 5/8" Hole in Ball (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Left Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...