1976-1986 Jeep CJ Parts & Accessories

Customize you trusty Jeep CJ with M.O.R.E.'s "RockProof" products. After installing our parts on your CJ7 or CJ8, you'll hit your favorites trails with greater confidence knowing your Jeep is up for the challenge. Our parts also carry a Lifetime Warranty.

Showing 1–32 of 88 results

Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Boomerang Shackle Military Wrap (87-95 YJ) Front or Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Universal Shock Mount

One of our top sellers. Designed for any axle housing, this 3/16" formed bracket has a 1/2" hole for the shock. This style mounts the shock with the bolt parallel to the housing tube. Inside dimension of the ears is 1-1/2". Center of Axle to center of 1/2" bolt...

Axle Off-Set Plate for 2-1/2" Wide Springs

Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4” or 1” forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...

Shackle Hanger (76-86 CJ) Front

FITS: 1976-1986 Jeep CJs, front pair. For 2" wide CJ width springs. 1" diameter bushings. Sold in pairs.

Lubeable Shackles (76-86 CJ) Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Polyurethane Bushing: 1-3/4"x3/4"x1-1/2"

1-3/4" x 3/4" polyurethane bushing x 1.450" long, used for the following motor mounts: JM100 JM200 JM300 JM400 JM500 JM700

Shackle Hanger (76-86 CJ) Rear

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

Shackle Hanger (76-86 CJ) Rear

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

Traction Bar for Rear Axle (CJ7, YJ)

Have you got a Jeep with the rear leaf Springs Over the Axle (S.O.A.), and the rear spring "wrap" is causing problems? We have the answer for you! This H.D. Traction Bar will prevent all spring wrap, without limiting travel or flexibility. The Johnny Joint® mounted shackle attaches...

Leaf Spring Mounts for 2-1/2" Axle Diameter

Fits 2-1/2" axle diameter for YJ Dana 30 axle. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to. Manufactured in Colorado,...

Lubeable Shackles (76-86 CJ) Front

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Shackle Reversal System (76-86 CJ with YJ Springs)

This system has all of the features as the 7686-1, however it comes with wider tubes and bushings to insert in the frame so you can install the wider Jeep® YJ Wrangler springs. Why, you ask? The Wrangler springs typically have a softer spring rate than CJ's adding...

$209.65 – $297.11 Select optionsSelect options

Shackle Hanger (76-86 CJ) Front

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt

3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt Sold individually.

Shackle Reversal System (76-86 CJ)

Stock width 2" springs are required. The new front pivot brackets are fully welded, and ready to bolt into existing holes in your CJ frame. Spacer plates are provided for the purpose of different winch mounting possibilities, and/or if you choose to use our Frame Plates (FP100 or...

$203.86 – $291.31 Select optionsSelect options

Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"

Want to build your own or just replace existing bolts? Here you go. Sold individually.

Spring Over Kit for Dana 30 Axle

This kit is built M.O.R.E. Bomb Proof. The Spring Perches and U-Bolt plates are made out of 1/4" plate steel. The shock mounts are made out of 3/16" plate, unheard of thickness for these parts. 5/8" holes in U-bolt plates for 9/16"-U bolts.

Tubing: 1-1/2"x.120" (2-1/4" long)

All universal bushing assemblies come complete with two polyurethane bushing halves, outer steel tubing, inner sleeve, mounting bolt and locking nut. Available only in black polyurethane! These universal bushing assemblies are handy for the home fabricator. For varied applications such as custom motor mounts (same as used in...

Rod End: 3/4" -16 Left Hand Thread with 5/8" Hole in Ball (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Shackle Side Plate 5 1/4" Boomerang Plate - Zinc Plated

Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement.Zinc plated, sold individually.

Full Width Axle Shackle Reversal System (76-86 CJ with 2-1/2" YJ Springs)

Installing a Jeep S.R.S. (shackle reversal system) allows the front suspension to travel in a much more natural action when the spring compresses, and our full width axle kits work seamlessly in conjunction with this system. In stock form when the front tire comes in contact with an...

$463.31 – $488.69 Select optionsSelect options

3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt

3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt Sold individually.

Boomerang Shackle (87-95 YJ) Front or Rear

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Lubeable Shackles (46-75 CJ)

M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...

Rod End: 5/8" -18 Right Hand Thread (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Rod End: 3/4" -16 Right Hand Thread with 5/8" Hole in Ball (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Leaf Spring Mounts for 3-1/4" Axle Diameter

Fits 3-1/4" axle diameter. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to. Manufactured in Colorado, laser cut and CNC formed...

Polyurethane Bushing - 1-1/2"x3/4"x1-1/2"

1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long used for 2-1/2" wide YJ springs. Sold each.

Shackle Side Plate 4 1/2" CTC Straight Plate (CJ)

Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement. Zinc plated, laser cut...

Shackle Hanger (76-86 CJ) Rear

These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Replace the stock...

Shackle Reversal System with Bolt-On Spring Hanger (76-86 CJ)

Stock width springs (2") are required. The front pivot brackets are fully welded, painted and ready to bolt into existing holes in your CJ frame. Spacers are provided for the purpose of different winch mounting possibilities, and / or if you want to use our frame plates (FP300)....

$335.90 – $347.79 Select optionsSelect options