All universal bushing assemblies come complete with two polyurethane bushing halves, outer steel tubing, inner sleeve, mounting bolt and locking nut. Available only in black polyurethane! These universal bushing assemblies are handy for the home fabricator. For varied applications such as custom motor mounts (same as used in...
Universal 3" wide spring hanger for most 2.5" wide springs. Manufactured from 1/4" thick material and fully welded, can be bolted or welded to frame. May also be used for control arm mounts. Sold in pairs. Made for the YJ and CJ.
Fits 2-3/4" axle diameter with special offset for spring over axle conversion. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to....
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
This kit is built M.O.R.E. Bomb Proof. The Spring Perches and U-Bolt plates are made out of 1/4" plate steel. The shock mounts are made out of 3/16" plate, unheard of thickness for these parts. 5/8" holes in U-bolt plates for 9/16"-U bolts.
Spacers provide room between the heim joint and mounting surface to allow the heim its full range of travel. Required in most heim joint applications, spacers prevent heim joint from binding against mount surfaces and damaging the components. Spacers can also be used to adjust the clearance between...
Tube End 3/4"-16 Right Hand Thread (Use 1-1/4"x .188 tubing)
Tube End 5/8"-18 Right Hand Thread (Use 1-1/8"x .188 tubing)
Tube End 3/4"-16 Left Hand Thread (Use 1-1/2"x .250 tubing)
Tube End 11/16"-18 Right Hand Thread (Use 11/4" x .188 tubing)