2007-2018 Jeep Wrangler JK Parts & Accessories

Choose M.O.R.E. parts and accessories to make your Jeep JK fit your driving style. Whether you're looking for more comfort and safety or for added protection to tackle tougher trails, look no further than M.O.R.E. parts. You're Sport, Sahara, or Rubicon will appreciate you for it.

Showing 1–32 of 64 results

ARB Dual Compressor Bracket for Jeep JK Unlimited - Rear Mount

   *Bundle Pricing Available *Powder Coated Black or Red *Red Powder Coated may take up to 5 business days to ship *Made in the USA   Easily install your ARB dual air compressor in the rear of your 2007 to 2018 Jeep Wrangler JK Unlimited (4 door) with...

Dual Battery Tray ('12+ JK)

Do you need more power since you have added a winch, lighting or other electrical demanding accessories? Want to never worry about a dead battery out on the trail? M.O.R.E.'s dual battery tray will accommodate TWO Optima series 34 and 34/78 or the OEM batteries side by side...

ARB 12 Volt Twin Air Compressor

Kit Includes: Fully assembled and tested air compressor (12V or 24V). Complete wiring loom w/ Air Locker solenoid plug-in terminals. Automotive OEM quality compressor isolating switch. 2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges. Mounting bolts and washers. Comprehensive photo illustrated installation...

Jeep Wrangler JK Hide-A-Step: Powder Coated - Front Door

Now it is easy to get into your Jeep with those large tires! This affordable step is easy to install, and has a convenient quick-disconnect feature. This step lowers your "step up" 11 inches. Quick disconnect: pull 2 pins and the Hide-A-Step will remove easy for when you...

Dead Pedal: Passenger (07+ JK)

Made with 1/8"and 3/16" Steel MORE is the original inventor of the Jeep Dead Pedal Bolts to factory location Made in the USA Powder Coated Black or Red Red Powder Coated may take up to 5 business days to ship Even passengers demand MORE comfort in riding. Why...

Jeep Wrangler JK Oil Pan and Transmission Skid Plate

  • Made of 3/16" Steel Plate- 38#
  • Available in  1/4" Aluminum- 26# (Part # JKOPSPALU)
  • Oil drain access with V catch to keep oil spots off your garage floor
  • Includes Slide Washers
  • Uses factory bolt locations
  • Made in the USA

1 Gallon Air Tank

Forged Aluminum 1 Gallon (4 Liter) Capacity JIC4 ports (x2) Compatible with ARB Air Compressor models CKMA12/CKMA24/CKMTA12/CKMTA24 6.5"W x 6.5"H x 10"L

Jeep Wrangler JK Hide A Step: Black -Rear Powder Coated

  Zinc plated .001 and powder coated black Available in zinc plated only (JKST07R) • This step lowers your "step up" 11 inches. • Quick disconnect: pull 2 pins and the Hide-A-Step will remove easy for when you want to go wheelin'. • Class IV zinc plating protects...

Rod End: 5/8" -18 Left Hand Thread (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Rod End: 3/4" -16 Left Hand Thread with 5/8" Hole in Ball (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Rod End: 5/8" -18 Right Hand Thread (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

1" Body Lift Pucks (Universal)

M.O.R.E. invented the one inch Jeep body lift "Puck" over 20 years ago. With the need to keep increasing tire sizes and a new generation of flexible suspension systems, it has become a necessity to move the body away from the frame for increased tire clearance. One inch...

Jeep Wrangler JK Hide A Step: Silver - Rear Door

  Zinc plated .001  Available in powder coated black (JKST07RB) • This step lowers your "step up" 11 inches. • Quick disconnect: pull 2 pins and the Hide-A-Step will remove easy for when you want to go wheelin'. • Class IV zinc plating protects against harsh winter conditions...

Jeep Wrangler JK Hide-A-Step : Silver - Front Door

Zinc plated .001  Available in powder coated black (JKST07B) • This step lowers your "step up" 11 inches. • Quick disconnect: pull 2 pins and the Hide-A-Step will remove easy for when you want to go wheelin'. • Class IV zinc plating protects against harsh winter conditions and...

Dead Pedal for 2007+ Jeep Wrangler JK

Made with 1/8" and 3/16" Steel MORE is the original inventor of the Jeep Dead Pedal Bolts to factory location Made in the USA Powder Coated Black or Red Red Powder Coated may take up to 5 business days to ship Why drive in discomfort with your new...

ARB Air Compressor Mount for Jeep Wrangler JK unlimited

  *Bundle Pricing Available *Made of 1/8" steel *Powder Coated Black or Red *Red Powder Coated may take up to 5 business days to ship *Made in the USA M.O.R.E. has done it again! We teamed up with ARB and designed a mounting bracket to fit under the...

JK Transfer Case Skid Plate ('07+ JK)

This add-on skid plate solves the problem, and offers up some affordable yet serious protection for your 2007+ JK Wrangler! Made out of 3/16" steel plate 27# M.O.R.E. has been proudly manufacturing Jeep armor and off-road protection parts for the last 35+ years. While the factory JK skid...

Rod End: 3/4" -16 Right Hand Thread with 5/8" Hole in Ball (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

D.O.T. Stainless Steel Braided Brake Lines - 28" Front

M.O.R.E is now offering several lengths of D.O.T stainless steel braided brake lines for virtually any Jeep! Replace the old rubber ones before they break, or if your working on a custom project, order the length you need. Sold in pairs, includes mounting bracket & compression washers

D.O.T. Stainless Steel Braided Brake Lines - 24" Rear

M.O.R.E is now offering several lengths of D.O.T stainless steel braided brake lines for virtually any Jeep! Replace the old rubber ones before they break, or if your working on a custom project, order the length you need. Sold individually.

1-1/4" x .188 Wall Dom Tube

1-1/4" x .188 wall dom tube used for custom drag links and tie rods. Choose quantity for feet (max shipping length is 7-feet).

D.O.T. Stainless Steel Braided Brake Lines - 25" Front

M.O.R.E is now offering several lengths of D.O.T stainless steel braided brake lines for virtually any Jeep! Replace the old rubber ones before they break, or if your working on a custom project, order the length you need. Sold in pairs, includes mounting bracket & compression washers

D.O.T. Stainless Steel Braided Brake Lines - 23" Front

M.O.R.E is now offering several lengths of D.O.T stainless steel braided brake lines for virtually any Jeep! Replace the old rubber ones before they break, or if your working on a custom project, order the length you need. Sold in pairs, includes mounting bracket & compression washers.

"Bomb Proof" Block Plates (LS1)

Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...

Retractable Roller Shade for Jeep JK '07-'17

MORE's awesome NEW roller shade for 2007-2017 Jeep JKs will help you get the most out of your Jeep! Enjoy the sun without the worry - MORE's easy-to-install roller shade retracts when you want to let the light in, then easily clips into place when you want to...

Bundle Pricing of ARB CKMTA12 Air Compressor, ARB Mounting Bracket, and 1 Gallon Air Tank (07+ JK)

This bracket is made of 1/8" plate and powder coated black. We use zinc plated steel risers, bolts and stainless steel bolts to give you a durable product that will last for the life of the Jeep. This mount fits 2007 and newer Jeep JK Wranglers and is...

Bundle Pricing of ARB CKMTA12 Air Compressor, and Mounting Bracket (07+ JK)

This bracket is made of 1/8" plate and powder coated black. We use zinc plated steel risers, bolts and stainless steel bolts to give you a durable product that will last for the life of the Jeep. This mount fits 2007 and newer Jeep JK Wranglers and is...

1" Body Lift (07+ JK 4-door)

M.O.R.E. invented the one inch Jeep body lift "Puck" over 20 years ago. With the need to keep increasing tire sizes and a new generation of flexible suspension systems, it has become a necessity to move the body away from the frame for increased tire clearance. One inch...

Lower Control Arm Torsion Bushing (TJ, XJ)

OD of flange 2.715 OD of main diameter 2.284 ID of thru bore .587 Length of thru bore of ID 2.618

Rod End: 3/4" -16 Left Hand Thread (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Rod End: 3/4" -16 Right Hand Thread (Heim Joint)

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

"Bomb Proof" Block Plates (LS) Adapter

These block plates allow you to now mount a Chevy LS motor if you already have our JM200 or JM400 motor mounts by just swapping the block plates.  Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places...