Axle Off-Set Plate for 2-1/2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) with Military Springs Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Double Jointed Front Trac Bar for Jeep Wrangler YJ (1987-95)
These 4x4 trac bars are a great replacement for the factory unit as well as for the customer who wants greater flexibility over the stock type Trac Bar but doesn't need to have the "telescoping" feature of the SlipLoc Trac Bar.The FRONT Trac Bar is a much needed...
Steering Kit: Tie Rod & Drag Link for Jeep CJ (1982-86) Wide Track
You can now replace the stock wimpy tie rod and drag link on your 1972-1986 Jeep® CJ with our Heavy-Duty Tie-Rod/Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end....
Axle Plates for our TB500 Traction Bar for Rear Axle for Jeep CJ7(1976-86) Jeep Wrangler YJ (1987-95)
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle. T500 Axle Plates for sold each. So order 2 per TB500 traction bar. FITS: CJ-7...
Main Eye Kit (87-95 YJ) Front & Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Transmission Mount for Jeep CJ (1966-86) Jeep Wrangler YJ (1987-95)
Do the shift levers "jump" all around in your Jeep? The transmission mount is probably worn out. Replace it with our Polyurethane Mount. It's not affected by oil, grease or road grime. It will tighten up the way your vehicle feels and it's the perfect complement with our...
Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Shackle Bolts and Bushing Kit for Jeep Wrangler YJ (1987-95) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Shackle Reversal System with Weld In Shackle Hanger for Jeep Wrangler YJ (1987-95)
The front pivot brackets are fully welded and powder coated. They bolt to the stock shackle mount and lower front bumper mounting holes and a hole that you must drill in the frame. Your shackles will hang from a weld-in tube through the frame. This is important for...