"Bomb Proof" Motor Mounts for Jeep Wrangler YJ (1987-95) & Wrangler TJ (1997-06) with 4.0L / 4.2L 6 cylinder & 1" Body Lift
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
Steering Correction Kit: Stage 1 for Jeep Wrangler YJ (1987-95)
Tie rods and drag links made from 1"x.219 wall DOM tubing, threaded on both ends with wrench flats milled for ease of adjustment.Includes: Knuckle bracket (#9923), tie rod and drag link assembly (#9924), and hardware kit (#9925).For use with spring over axle only.
Shock Hoops - Front Upper for Jeep Wrangler YJ (1987-95)
M.O.R.E. is pleased to introduce our newest product, our "Long Travel" front upper shock mounts for the 1987-1995 Jeep® YJ Wrangler. These mounts bolt-on, with minor cutting of the stock shock tower. It will allow the use of a 3" longer front shock without a body lift! And,...
Main Eye Kit (87-95 YJ) Front & Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go.Sold individually.
"Bomb Proof" Motor Mounts for Jeep Wrangler YJ (1987-95) & TJ (1997-06) with 6-cylinder 4.0L / 4.2L
This motor mount kit is designed for your Jeep® vehicle, creating a crossmember with the engine, improving clutch linkage operation, and beefing up your Jeep® for serious wheelin'. Mounts the engine its stock location. Fits the following 6-cylinder engines 4.0L or 4.2L: 1987-95 Jeep® YJ 1997-06 Jeep TJ,...
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
"Bomb Proof" Motor Mount Conversion Kit Chevy LS (Gen III & IV) for Jeep Wrangler YJ (1987-95)
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go.Sold individually.
Transmission Mount for Jeep CJ (1966-86) Jeep Wrangler YJ (1987-95)
Do the shift levers "jump" all around in your Jeep? The transmission mount is probably worn out. Replace it with our Polyurethane Mount. It's not affected by oil, grease or road grime. It will tighten up the way your vehicle feels and it's the perfect complement with our...
Spring Shackle Hanger for Jeep Wrangler YJ (1987-95) Front
These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle. The YJ shackle hangers are a weld on heavy duty factory replacement (SR103).
Shackle Bolts and Bushing Kit for Jeep Wrangler YJ (1987-95) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...