1" OD x 1.8125" Long Drilled Sleeve for 1/2" Bolt for our shackle side plates
1" OD x 1.8125" Long Drilled Sleeve with a hole for a 1/2" Bolt for spacing our shackle side plates. The sleeve is used as the center bolt spacer in our LS9033 lubeable shackle kit. Sold individually.
1" OD x 2.5" Long Drilled Sleeve for 1/2" Bolt for our shackle side plates
1" OD x 2.5" Long Drilled Sleeve with a hole for a 1/2" Bolt for spacing our shackle side plates. The sleeve is used as the center bolt spacer in our LS9035 lubeable shackle kit. Sold individually.
1" OD x 3" Long Drilled Sleeve for 1/2" Bolt for our shackle side plates
1" OD x 3" Long Drilled Sleeve with a hole for a 1/2" Bolt for spacing our shackle side plates. The sleeve is used as the center bolt spacer in our LS9034, LS9039, LS9040, LS9081, & LS9091 lubeable shackle kits. Sold individually.
1/2" Bolt Zerk Protector
Tired of breaking the grease zerk off your bolts? We have the answer with our new "Zerk Protectors" for greasable shackles. Fits 1/2" Zerk Bolts M.O.R.E. part #s S10191 or S10193 Sold individually.
3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt
3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt Sold individually.
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt Sold individually.
9/16" Bolt Zerk Protector
Tired of breaking the grease zerk off your bolts? We have the answer with our new "Zerk Protectors" for greasable shackles. Sold individually.
Axle Off-Set Plate for 2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Axle Off-Set Plate for 2-1/2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Axle Plates for our TB500 Traction Bar for Rear Axle for Jeep CJ7(1976-86) Jeep Wrangler YJ (1987-95)
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle. T500 Axle Plates for sold each. So order 2 per TB500 traction bar. FITS: CJ-7...
Frame Plates - Front Side for Jeep CJ (1972-86)
These start at the front bumper and extend past the first body mount outrigger. Front pair. Reinforce the frame of your Jeep CJ with these 3/16" thick steel plates. Pre-punched holes line up perfectly, and their contour cut to the shape of the frame. Weld them on the...
Frame Plates - Rear Cross for Jeep CJ (1976-86)
Reinforce the frame of your Jeep CJ with these 3/16" thick steel plates. Pre-punched holes line up perfectly, and their contour cut to the shape of the frame. Weld them on the outside of the frame and add serious strength to the stock weak design. Available for the...