Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) Front or Rear
$199.00
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all parts clamped in place, and all greaseable shackles for Jeep vehicles are sold in pairs. Order two pairs to outfit both ends of your Jeep.
Our Jeep shackles are laser cut. Zinc plated gold for a professional finish. Sold in pairs.
You will need to measure the spring for the bushing size or call the manufacture of your spring.
FITS: 1987-1995 Jeep Wrangler YJ - Front or Rear Boomerang Shackle
1976-1986 Jeep CJ All - Front or Rear Boomerang Shackle
| Spring Width & Spring Eye Size | Yj front or rear: 2.5" wide stock springs with 1.25" spring eye bushings, Yj front or rear: 2.5" wide aftermarket springs with 1.5" spring eye bushings, Yj front or rear: 2.5" wide skyjacker springs with 1" spring eye bushings, Cj front: 2" wide stock cj springs with 1" spring eye bushings, Cj rear: 2.5" wide stock cj springs with 1" spring eye bushings, Cj rear: 2.5" wide stock yj springs with 1.25" spring eye bushings, Cj rear: 2.5" wide aftermarket yj springs with 1.5" spring eye bushings |
|---|
QUESTIONS & ANSWERS
Ask a Question-
Installed these shackles with my RE 1.5” SOA leaf (reverse eye) seems that the cross bolt is resting on the leaf and limiting travel under compression. Is there a different shackle I should be using or can I get away with removing the cross bolt?
Yes you can especially since the shackle plate are made out of 3/8" plate.
Thanks -
Are these stock height or do they provide a lift?
These 9081 are 3/4" longer than stock
-
These will fit OME military wrap leaf springs?
Lyle,
You can use the LS9081 but you wont be able to use your center brace. The LS9091 will work for the military wrap and be able to use your center brace.
Here is the link to the 9091
https://mountainoffroad.com/collections/all/products/boomerang-shackle-military-wrap-87-95-yj-front-or-rear?_pos=1&_sid=ffb4b27bb&_ss=r
Thanks,
Scott -
length center to center of bolt holes?
9081 is 4.75 ctc and the 9091 is 5.25 ctc
