Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Want to build your own or just replace existing bolts? Here you go. Sold individually.
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Want to build your own or just replace existing bolts? Here you go. Sold individually.
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt Sold individually.
1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long. Used for 2-1/2" wide YJ springs at main eye and some aftermarket springs at the shackle end. Used at main eye of CJ rear springs 2-1/2" wide. Also used in our JM25840 & JM25840L motor mounts. Sold each.
Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement.Zinc plated, sold individually.
3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt Sold individually.
1-3/4" x 3/4" polyurethane bushing x 1.450" long, used for the following motor mounts: JM100 JM200 JM301 JM400 JM500 JM700