Axle Off-Set Plate for 2-1/2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) with Military Springs Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Lubeable Shackles for Jeep CJ (1976-86) Front
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Lubeable Shackles for Jeep CJ (1976-86) Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Main Eye Kit (87-95 YJ) Front & Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Spring Shackle Hanger for Jeep Wrangler YJ (1987-95) Front
These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle. The YJ shackle hangers are a weld on heavy duty factory replacement (SR103).
Shackle Bolts and Bushing Kit for Jeep Wrangler YJ (1987-95) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings.* Crimp-Loc nuts keep all...
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt Sold individually.
Polyurethane Bushing - 1-1/2"x3/4"x1-1/2"
1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long. Used for 2-1/2" wide YJ springs at main eye and some aftermarket springs at the shackle end. Used at main eye of CJ rear springs 2-1/2" wide. Also used in our JM25840 & JM25840L motor mounts. Sold each.