Steering Box Mount H.D. for Jeep CJ (1976-86)
$104.99 – $159.99
M.O.R.E. Has answered the problem with the steering when you move your front axle forward. This New Heavy Duty steering box bracket will move your steering gear forward 1- 1/4". This will keep the drag link from interfering with the tie rod and like the standard bracket will...
M.O.R.E. Has answered the problem with the steering when you move your front axle forward. This New Heavy Duty steering box bracket will move your steering gear forward 1- 1/4". This will keep the drag link from interfering with the tie rod and like the standard bracket will keep the steering gear from being ripped off the frame. Made from 3/8" and 1/2" steel plate. Works with a Shackle Reversal System, or stock set-up.
You will have to notch the front crossmember of your frame for clearance.
Fits 1976-1986 Jeep® CJ-5, CJ-7, CJ-8
| Finish | No zinc plating, Yellow zinc plated, U weld / pieces have not been welded together |
|---|
QUESTIONS & ANSWERS
Ask a Question-
Will this kit work if going with a YJ spring conversion?
Yes,
Thanks -
Do you have a RHD option on this?
We dont. The only thing I can do is send out a kit un-welded and have you tack weld it in position and then remove it to fully weld it out.
-
Does this mount (SB7686-1) move the steering box closer to the middle of the Jeep? My CJ7 came with a D44 swap and a shackle reversal. I want to LS swap it and am concerned about steering shaft clearance against the headers.
James,
The SB-7686-1 steering box will only move it forwad 1" forward from its stock location.
Thanks
Scott -
Wil this bracket (or SB7686) work of a 1972 Jeep Commando? What is differnt or requires modification for the earlier jeep?
Don,
It will not work. The frames are totaly differant and it is for a power steering unit.
Thanks,
Scott -
I need to move my drag link forward due to the pitman arm rubbing the tie rod. Can I use the forward mount bracket to do this yet maintain the stock axle location.
Steve,
Yes you use our part # SB7686-1
Thanks, Scott -
Will this work with a stock axle location in anticipation of an axle relocation?
Adam, You will need to make a decesion on stock location or axle relocate for this bracket. The two steering brackets are designed for spicificaly stock location or the -1 version for the axle relocate. I hope that helps. Thanks, Scott
-
Will this work on a1974 cj5
This will not bolt directly on to a 1974 CJ5 frame. This will require fabrication to the frame and a powersteering box.
Thanks
