5/8 Rod End Spacer
Spacers provide room between the heim joint and mounting surface to allow the heim its full range of travel. Required in most heim joint applications, spacers prevent heim joint from binding against mount surfaces and damaging the components. Spacers can also be used to adjust the clearance between...
Axle Off-Set Plate for 2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Axle Off-Set Plate for 2-1/2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Clevis Mount: 2 3/4" Long
Dimensions: 2 3/4" Long Bolt Size: 1" Thickness: 1/2" Radius: N/A
Coil Bucket from Ford 8.8 Kit for Jeep Wrangler TJ (1997-2006) LJ (2004-06)
This coil bucket fits all 3-1/4" diameter axles and is 3/16" thick plate, laser cut, and CNC formed. This is the same bracket out of our Ford 8.8 install kit for those of you who want to make your own axle design. Sold each. Fits 1997-06 Jeep Wrangler...
Coil Retainer from Ford 8.8 Kit for Jeep Wrangler TJ (1997-2006) LJ (2004-06)
This coil retainer (used with 98700-3 Coil Bucket) is 3/16" thick plate, laser cut, and CNC formed. This is the same bracket out of our Ford 8.8 install kit for those of you who want to make your own axle design. Sold each. Fits 1997-06 Jeep Wrangler TJ...
Front Shackle Hanger for Jeep CJ (1976-86) Heavy Duty Front Stock Replacement
FITS: 1976-1986 Jeep CJs, front pair. For 2" wide CJ width springs. Uses the stock 1" diameter bushings. Sold in pairs.
Front Shackle Hanger for Jeep CJ (1976-86) with YJ Springs
These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Moves your front...
Front Shackle Hanger System for Jeep CJ (1976-86) with YJ Springs, Includes YJ bushings
These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle or for those of you who want to convert your CJ to YJ springs. Moves your front...
Leaf Spring Mounts for 2-1/2" Axle Diameter
Fits 2-1/2" axle diameter for YJ Dana 30 axle. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to. Manufactured in Colorado,...
Leaf Spring Mounts for 2-1/2" Axle Diameter
Fits 2-1/2" axle diameter. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to. Manufactured in Colorado, laser cut and CNC formed...
Leaf Spring Mounts for 2-3/4" Axle Diameter
Fits 2-3/4" axle diameter with special offset for spring over axle conversion. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to....