Steering & Suspension

Spacers provide room between the heim joint and mounting surface to allow the heim its full range of travel. Required in most heim joint applications, spacers prevent heim joint from binding against mount surfaces and damaging the components. Spacers can also be used to adjust the clearance between...

Boulder Bushings work great on control arms , traction bars, or where ever you need an adjustable bushing assembly. These come complete with bushings, inner sleeve (specify for 1/2" or 9/16" bolt) and jam nut. Bolt not included.

Dimensions: 2 3/4" Long Bolt Size: 1" Thickness: 1/2" Radius: N/A

This coil bucket fits all 3-1/4" diameter axles and is 3/16" thick plate, laser cut, and CNC formed. This is the same bracket out of our Ford 8.8 install kit for those of you who want to make your own axle design. Sold each. Fits 1997-06 Jeep Wrangler...

This coil retainer (used with 98700-3 Coil Bucket) is 3/16" thick plate, laser cut, and CNC formed. This is the same bracket out of our Ford 8.8 install kit for those of you who want to make your own axle design. Sold each. Fits 1997-06 Jeep Wrangler TJ...

Have you installed a Ford 8.8 rear axle (disc brake) in your Jeep TJ and need to have the correct cables for the emergency brake? We have the correct cables in stock! The quality is outstanding and they are very rugged, ready for your off-road abuse. Sold in...

Features of our Ford 8.8 install kit are as follows: same lug nut bolt pattern; disc brakes ('95 & newer); 31 spline axle shafts; 8.8" diameter ring gear (D35 is 7.5"); 120% stronger than D35; only 20 pounds more than D35; trac-loc differential stock; and 3-1/4" diameter tubes...

Fits 3-1/4" axle diameter. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to. Manufactured in Colorado, laser cut and CNC formed...

This lower control arm bracket fits all 3-1/4" diameter axles and is 3/16" thick plate, laser cut, and CNC formed. This is the same bracket out of our Ford 8.8 install kit for those of you who want to make your own axle design. Sold in pairs. Fits...

OD of flange 2.715 OD of main diameter 2.284 ID of thru bore .587 Length of thru bore of ID 2.618

These lug nuts are for our M.O.R.E. Wheel Spacer WS5450.

Dimensions: 2 1/2" long Bolt Size: 1/2" Thickness: 3/16" Radius: 2 3/4"