Steering Brace for Jeep Wrangler TJ (2003-06) / LJ (2004-06)
M.O.R.E.'s steering brace is powder coated and the clamp is zinc plated. All mounting hardware is included, and the steering box brace is just a simple bolt-on design. No drilling or mods are required (for most applications). This brace ties your power steering box to the passenger frame...
Steering Brace for Jeep Wrangler TJ (1997-02)
M.O.R.E.'s steering brace is powder coated and the clamp is zinc plated. All mounting hardware is included, and the steering box brace is just a simple bolt-on design. No drilling or mods are required (for most applications). This brace ties your power steering box to the passenger frame...
Steering Riser Bracket: 1" for Jeep Wrangler TJ (1997-06)
This bracket will raise the steering pillow block to get rid of the annoying bump feel that occurs with the 1" & 1-1/4" body lifts. Same bracket that we use in our TJ body lift kits (BLTJ97). Available for 4.0L (6 cylinder) or 2.5L (4 cylinder).
Rod End: 3/4" -16 Left Hand Thread with 5/8" Hole in Ball (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Left Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Right Hand Thread with 5/8" Hole in Ball (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Right Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 5/8" -18 Left Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 5/8" -18 Right Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Steering Box Clamp
If you want to fabricate your own Steering Brace, then you can purchase a M.O.R.E. Steering Box Clamp. Zinc Plated (clamp and hardware only)
Steering Box Clamp for SB9037TJ03 Brace
If you want to fabricate your own Steering Brace for your 2003-06 Jeep Wrangler TJ or LJ, then you can purchase a M.O.R.E. Steering Box Clamp. Zinc Plated (clamp only)
Tube End 3/4"-16 Left Hand Thread
Tube End 3/4"-16 Left Hand Thread (Use 1-1/2"x .250 tubing)