Full Width Axle Shackle Reversal System for Jeep CJ (1976-86) with 2" CJ Springs
Installing a Jeep S.R.S. (shackle reversal system) allows the front suspension to travel in a much more natural action when the spring compresses, and our full width axle kits work seamlessly in conjunction with this system. In stock form when the front tire comes in contact with an...
Full Width Axle Shackle Reversal System for Jeep CJ (1976-86) with 2-1/2" YJ Springs
Installing a Jeep S.R.S. (shackle reversal system) allows the front suspension to travel in a much more natural action when the spring compresses, and our full width axle kits work seamlessly in conjunction with this system. In stock form when the front tire comes in contact with an...
Shackle Reversal System with Bolt-On Spring Hanger Brackets for Jeep CJ (1976-86) with 2" CJ Springs
Stock width springs (2") are required. The front pivot brackets are fully welded, painted and ready to bolt into existing holes in your CJ frame. Spacers are provided for the purpose of different winch mounting possibilities, and / or if you want to use our frame plates (FP300)....
Shackle Reversal System with Bolt-On Shackle Hanger Brackets for Jeep CJ (1976-86) with 2.5" YJ Springs
The front pivot brackets are fully welded, powdercoated and ready to bolt into existing holes in your CJ frame. Spacers are provided for the purpose of different winch mounting possibilities, and / or if you want to use our frame plates (FP300). The mounting method for the shackles...
Shackle Reversal System with Weld In Shackle Hanger for Jeep Wrangler YJ (1987-95)
The front pivot brackets are fully welded and powder coated. They bolt to the stock shackle mount and lower front bumper mounting holes and a hole that you must drill in the frame. Your shackles will hang from a weld-in tube through the frame. This is important for...
Shackle Reversal System with Bolt-On Spring Hanger Brackets for Jeep Wrangler YJ (1987-95)
The front pivot brackets are fully welded and powder coated. They bolt to the stock shackle mount and lower front bumper mounting holes and additional holes that you must drill in the frame. Your shackles mount to our unique shackle hanger that is adjustable (fore & aft) on...
Shackle Reversal System for Jeep CJ (1976-86) with 2.5" YJ Springs
This system has all of the features as the 7686-1, however it comes with wider tubes and bushings to insert in the frame so you can install the wider Jeep® YJ Wrangler springs. Why, you ask? The Wrangler springs typically have a softer spring rate than CJ's adding...
Shackle Reversal System for Jeep CJ (1976-86) with 2" CJ Springs
Stock width 2" springs are required. The new front pivot brackets are fully welded, and ready to bolt into existing holes in your CJ frame. Spacer plates are provided for the purpose of different winch mounting possibilities, and/or if you choose to use our Frame Plates (FP100 or...
Shackle Reversal Front Brackets for Jeep Wrangler YJ (1987-95)
For the person who wants to buy just the front brackets and hardware and mount the shackles your own way. Brackets are fully welded. Instructions included. For shackle mounting, you can use our Universal Bushing Assemblies mounted through the frame, or welded under the frame. Front brackets only...
Shackle Reversal Brackets for Jeep CJ (1976-86)
The front pivot brackets are fully welded, painted and ready to bolt into existing holes in your CJ frame. Spacers are provided for the purpose of different winch mounting possibilities, and / or if you want to use our frame plates (FP300). All brackets are fully assembled and...
Aluminum bushing for Shackle Reversal System Front Bracket (87-95 YJ)
These are replacement aluminum bushings for Shackle Reversal System Front Bracket (87-95 YJ). Rather you are moving your shackle reversal system to a new frame or just somehow wore the bushings out. The aluminum bushings are sold individually. Below are installation instructions to 8795-50 and 8795-5.