Axle Off-Set Plate for 2-1/2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Axle Plates for our TB500 Traction Bar for Rear Axle for Jeep CJ7(1976-86) Jeep Wrangler YJ (1987-95)
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle. T500 Axle Plates for sold each. So order 2 per TB500 traction bar. FITS: CJ-7...
Grade 5 Zerked Bolt 9/16"-12 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Grade 5 Zerked Bolt 1/2"-13 x 4 1/2"
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Transmission Mount for Jeep CJ (1966-86) Jeep Wrangler YJ (1987-95)
Do the shift levers "jump" all around in your Jeep? The transmission mount is probably worn out. Replace it with our Polyurethane Mount. It's not affected by oil, grease or road grime. It will tighten up the way your vehicle feels and it's the perfect complement with our...
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt
3/4" OD x 3" Long Drilled Sleeve for 9/16" Bolt Sold individually.
Polyurethane Bushing - 1-1/2"x3/4"x1-1/2"
1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long. Used for 2-1/2" wide YJ springs at main eye and some aftermarket springs at the shackle end. Used at main eye of CJ rear springs 2-1/2" wide. Also used in our JM25840 & JM25840L motor mounts. Sold each.
Traction Bar for Rear Axle for Jeep CJ7(1976-86) Jeep Wrangler YJ (1987-95)
Have you got a Jeep with the rear leaf Springs Over the Axle (S.O.A.), and the rear spring "wrap" is causing problems? We have the answer for you! This H.D. Traction Bar will prevent all spring wrap, without limiting travel or flexibility.The Johnny Joint® mounted shackle attaches to...
Shackle Side Plate 5 1/4" Boomerang Plate - Zinc Plated
Have quality bushings in your springs and frame mounts but want to replace your wimpy Jeep shackles? Purchase our shackle side plates found on all of our lubeable shackle sets. Shackle plates are laser cut out of 3/8" steel for a super strong replacement.Zinc plated, sold individually.
3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt
3/4" OD x 3" Long Drilled Sleeve for 1/2" Bolt Sold individually.
"Bomb Proof" Block Plates (LS) Adapter
These block plates allow you to now mount a Chevy LS motor (Gen III & IV) if you already have our JM200 or JM400 motor mounts by just swapping the block plates. Now that rock crawling has become the favorite past time for Jeepers and we are putting...
Torque Arm Mount for Jeep CJ (1972-86) Jeep Wrangler YJ (1987-95)
Replace the stock rubber transmission and torque arm mounts with these black polyurethane units. They are not affected by oil or grease, road grime, or salt. They will tighten up the way your Jeep feels and help to hold the drive train in place. Fits 1972-1995 Jeeps. Polyurethane....