About Us

The Most Popular Jeep Mods Right Now and Why They Pay Off

The Most Popular Jeep Mods Right Now and Why They Pay Off - Mountain Offroad (M.O.R.E.)

Overview

Ask ten off-roaders what to buy first and you’ll get twelve answers and three arguments. Forums are great for war stories. They’re terrible at telling you what people actually spend their money on once the arguing stops.

So we checked. We went through our own order history, the product reviews our customers left, and the list of people who came back to buy the exact same part twice. What came out surprised even us. 

It’s not just a parts list, it’s a map of the problems real rigs run into.

For each one, you’ll get the symptom, a quick check you can do at home, the part that fixes it and the rigs it fits. Most of it is about Jeeps, because that’s where most of the Jeep aftermarket parts in our shop go, but 4Runner, Tacoma and GM truck owners will find answers too, including Toyota 4Runner accessories that sit near the top of our list.

Table of Contents

  • Part 1 – The Must Have Jeep Mods Owners Order Before Anything Else
  • Part 2 – The Five-Star Favorites: Where The Best Jeep Upgrades For The Money Really Show Up
  • Part 3 – The Parts Customers Come Back To Buy Again
  • Part 4 – Parts You Won’t Find On Every Shelf
  • Part 5 – Partner Gear Worth Knowing About: The Ideas Behind Our Favorite Jeep Parts And Accessories

 

Part 1 – The Must Have Jeep Mods Owners Order Before Anything Else

Look at the top of our order list and you won’t find lift kits or light bars. You’ll find parts that fix something an owner feels on every single drive.

The Number One Seller Nobody Would Have Guessed

CJ owners, this one’s yours. The part ordered more than anything else in our store is the heavy-duty steering box mount for 1976 to 1986 CJs, and our CJ steering brace sits in third place.

On a CJ, the steering box bolts to the driver-side frame rail, and every turn pulls on a small patch of that rail. On stock tires, plenty of owners never have trouble. Add bigger tires or regular trail time, and the metal around those bolts can flex and crack. The box moves, and the Jeep wanders. That’s why owners searching for a Jeep CJ steering wander fix usually end up looking at the frame, not the steering wheel.

The check takes thirty seconds. Set the brake, keep your hands clear, and have a helper rock the steering wheel a few inches each way with the engine running while you watch the box. It shouldn’t shift on the frame. If it does, or you spot cracks around the bolt holes, deal with that before anything else.

The mount reinforces the spot where the box bolts on, and the brace ties the box to the passenger-side rail so both rails share the load. One owner who’d driven his CJ5 for 30 years wrote that he “never knew it could drive like this!” CJ owners in a long-running steering thread on Jeep-CJ.com recommend the same fix once lifts and oversize tires enter the picture. You’ll find both parts in our Steering Box Mount collection and our Steering Braces collection.

YJ and XJ owners deal with the same pull on the driver-side rail, and the same collection has braces for both. If you drive a YJ, our Jeep YJ Build Guide covers what to fix before you lift.

The Jeep Accessories Owners Wish They'd Found Sooner

JL and Gladiator owners put our dead pedal in second place. A dead pedal is a solid footrest for your left foot, and the factory doesn’t give you a proper one. On your next highway trip, notice where your left foot is after an hour. If it’s floating or jammed at an odd angle, that’s the gap. Is a Jeep dead pedal worth it? One Gladiator owner said he’s surprised Jeep doesn’t put one in from the factory. If you’re writing a list of first mods for Jeep Wrangler JL that you’ll actually feel every day, this belongs near the top. Our Dead Pedals collection has the versions for the JL and the Gladiator.

Owners of any lifted rig hit the next problem the day bigger tires go on: getting people in. Watch a shorter passenger climb in. If they grab the roll bar and use a knee, you need a step. Figuring out how to get into a lifted Jeep is why our Hide-A-Step ranks fourth on our order list. One JL owner went to 35s, watched his wife and friends struggle, added our steps and called it “problem solved.” It’s a spring-loaded step that folds back out of the way when nobody’s using it and comes off by pulling two pins before a hard trail. The Hide-A-Step collection covers every Jeep from the CJ through the Gladiator, plus 1999 to 2013 Ford Super Duty and Chevy/GMC pickups.

The Trail-Day Problem Nobody Warns You About

In U.S. Forest Service field tests on logging trucks, published by SAE International, trucks running reduced tire pressure climbed 18% grades without help and gained real traction. A softer tire spreads out and grabs.

The problem is the drive home. When the nearest air hose is a long way off, people skip airing down or drive home soft. If either sounds familiar, you need onboard air for Jeep or Toyota builds.

4Runner owners made this our fifth most-ordered part. Our bracket for Gen 4 (2003 to 2009) and Gen 5 (2010 and up) 4Runners holds an ARB twin air compressor and a 1-gallon air tank in one solid, protected spot, which makes it one of the most popular 4Runner offroad parts we build.

Tacoma, Tundra, Jeep, Bronco and GM truck owners have brackets of their own in our Air Compressors & Mounts collection. One JL owner put it simply: the design keeps the compressor out of the way and out of the elements.

The Hidden Hero Under The Hood

Motor mounts hold your engine to the frame and soak up every hit off a ledge. Worn ones announce themselves with a clunk when you shift or hit the throttle. To check, have a helper hold the brake and gently shift between drive and reverse while you watch the engine with the hood up, hands clear. A little movement is normal. If the engine lifts or the rubber is cracked or separated, the mounts are done.

YJ, TJ, LJ and XJ owners with the 4.0L keep our Bomb Proof motor mounts in our top ten. They bolt into the stock frame, they’re made in the USA and they carry our RockProof lifetime warranty. If you’re shopping Jeep TJ motor mounts and running a Jeep Wrangler TJ body lift, there’s a version built for exactly that setup. The whole lineup, including mounts for V8 swaps in CJs, is in our Motor Mounts collection.

 

Part 2 – The Five-Star Favorites: Where The Best Jeep Upgrades For The Money Really Show Up

What 1400+ Reviews Say That Spec Sheets Never Will

A spec sheet tells you thickness and finish. A review tells you whether the part bolted up on a Saturday morning without a second trip to the store.

Read enough of ours and a pattern shows up. The highest-rated parts aren’t the flashiest. They fit the first time and fix something the owner used to put up with daily. The CJ steering brace from Part 1 is one of our highest-rated parts, and even a four-star review on it says it took away most of the wandering in a 1980 CJ5.

JL owners keep giving top marks to the front skid plate. One review explains why: he tried another brand first, it didn’t fit, ours fit perfectly. If you’re narrowing down the best Jeep Wrangler JL accessories, fit is the first thing worth paying for. Gladiator owners rate our steps and dead pedal near the top too, which says a lot about where Jeep Gladiator accessories money ends up once the fun stuff is on.

The Upgrade You Only Appreciate The Day A Trail Fights Back

So, do I need skid plates on my Jeep? Grab a flashlight and crawl underneath. Look at what hangs lowest: the transfer case, the oil pan, the gas tank. Then look at the factory plates. Fresh scrapes and dents are hits you’ve already taken.

Now the math. According to ConsumerAffairs’ guide to transfer case repair costs, the typical Jeep Wrangler transfer case replacement cost runs around $3,900, and most of that is the part itself. A skid plate costs a fraction of that.

TJ owners have a good example in Troy M., who took three hard hits right at the transmission pan on a Black Hills trip with our Jeep Wrangler TJ skid plate underneath, and it barely got a scratch. Gladiator owners will recognize the logic of one buyer who put our aluminum Jeep Gladiator skid plates under his JT because he didn’t want to go cheap on something protecting thousands of dollars.

That leaves the classic debate, steel vs aluminum skid plates. Our 3/16-inch steel takes repeated hits and slides over rock. Our 1/4-inch aluminum saves weight, which matters once a bumper and winch are already on the front. Wide spans get a vertical rib for extra stiffness, and both are made in the USA. Pick steel if you crawl rocks often, aluminum if your rig is a daily driver that sees trails on weekends. Compare every option in our Skid Plates collection, and if you’re not sure what actually needs armor, our Skid Plates 101 guide covers it, including where you probably don’t.

 

Part 3 – The Parts Customers Come Back To Buy Again

Why The Best Jeep Aftermarket Parts Earn A Second Order

Most parts in this guide are a one-time buy for a rig, so when an owner orders the exact same part again, that tells you more than any review. The step leads this list by a wide margin. Some owners start with one door and come back for the other. Others refuse to drive their next rig without it. Marvin B. had a pair on his JK and bought another for his JL. Eric T. liked his so much that he ordered them again for his new Jeep. If you’ve been reading hide a step Jeep reviews, that’s about as clear as it gets.

Ronald M. put our dead pedal in his 2016 Rubicon, then ordered another for his 2025 Gladiator. Troy bought a second set of our motor mounts because he liked them so much on his last Jeep.

It also answers a common question: do Jeep mods increase resale value? Rarely, since pricing guides like Edmunds don’t put a number on aftermarket parts. The value shows up when you buy your next rig and already know what to bolt on first.

 

Part 4 – Parts You Won't Find On Every Shelf

The Fits Most Brands Quietly Skip

Owners of older rigs know this feeling: you search, you scroll, and every result is for something built last year. One XJ owner on the NAXJA forum put it plainly: “How much longer can we find parts and run XJ’s?” If you’ve been hunting Jeep Cherokee XJ parts lately, you know the worry. We still build for these platforms, and that’s where our most unusual parts come from.

TJs built with the 2.5L four have engine mounting points in different spots than the six-cylinder trucks, so dropping in a 4.0L used to mean chasing measurements or a donor frame. Our 4.0L Motor Mount Frame Horn Conversion handles the TJ 2.5 to 4.0 frame mount conversion and works with factory or Bomb Proof mounts. Michael Y. was stuck on exactly that problem until a buddy showed him our kit, which he called “your complete answer.” It’s one of our steady best sellers.

Gladiator Rubicon owners have a different problem: the bed sits high. Our Rubicon Bed Steps bolt on and give you a solid place to step up into the bed on the Jeep Gladiator JT Rubicon.

Squarebody owners want a winch without losing the classic face. Our Squarebody Hidden Winch Mount tucks the winch behind the stock bumper on 1981 to 1987 GMC and Chevrolet trucks. Plan on trimming the bumper at the license plate. Among GM truck accessories, a winch you can barely see is hard to find.

What American Made Off Road Parts Really Have To Prove

“Made in USA” shows up on a lot of boxes, and legally it has to mean something. Under the FTC’s Made in USA standard, a product has to be “all or virtually all” made in the United States before a company can make that claim without qualifiers.

That’s the bar our own parts are built to. They’re sourced and crafted in Colorado, and the product pages for our Jeep skid plates, motor mounts and steps say Made in USA right on them. When you compare American made Jeep parts from any brand, look for that claim on the product page itself.

Part 5 – Partner Gear Worth Knowing About: The Ideas Behind Our Favorite Jeep Parts And Accessories 

Three Smart Ideas You Probably Haven't Seen Yet

We don’t build everything ourselves. The partner gear we carry made the cut because each piece fixes a real trail problem in a smart way.

If you run a winch, the hook is the part that takes the whole load. The Carbon Offroad Mega Pro Winch Hook is forged and heat-treated with an I-beam body, the same shape builders rely on in bridges, and it’s rated for winches up to 20,000 lb.

If your rig powers a fridge, lights or a winch, a single battery works hard, and cold weather cuts what it can deliver. The Gen 3 Dual Battery System in our Battery Systems & Accessories collection fits Jeep, Toyota and Bronco models, designed around each vehicle instead of a one-size kit, so your starting battery stays free to start the engine.

If you go long or late in the season, fuel range shrinks fast, and the station in the trail town may already be closed. The packs in our RotopaX lineup carry fuel, water or gear, stack together and lock to the mount, so the extra supply stays put outside the cab. That’s why these pieces show up in builds of every brand, from Jeep Wrangler aftermarket products to Toyota Tacoma aftermarket accessories and the accessories Ford Bronco owners choose for their own rigs.

Final Thoughts: What Mountain Offroad Reviews Tell You Before Your Next Upgrade

If you drive a CJ, YJ or XJ, start with the steering and check that box before you buy anything bigger. If your JL or Gladiator is your daily, the dead pedal and the steps are the upgrades you’ll feel the soonest. If you air down, give the air a permanent home. If your trails have rocks, crawl underneath with a flashlight and let the scrapes tell you where the armor goes.

When you’re ready, our Best Sellers collection puts the parts owners order most in one place.

 

Reading next

Jeep XJ Build Guide: 5 Mistakes To Avoid On Your First XJ - Mountain Offroad (M.O.R.E.)
Winter 4x4 Fun: 7 Must-Haves Beyond Jeep Offroad Parts - Mountain Offroad (M.O.R.E.)

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.