Toyota & Jeep Skid Plates

Increase the odds that your next off-road adventure won't result in major undercarriage damage. We manufacture the toughest skid plates to protect your transfer case, oil pan, gas tank, transmission, evap canister and front of your JK, JL, and TJ Jeep and Toyota. Made out of 3/16” steel plate and 1/4” aluminum if you want to keep you vehicle light. We also reinforce the middle of the plat. . . Show More >

Increase the odds that your next off-road adventure won't result in major undercarriage damage. We manufacture the toughest skid plates to protect your transfer case, oil pan, gas tank, transmission, evap canister and front of your JK, JL, and TJ Jeep and Toyota. Made out of 3/16” steel plate and 1/4” aluminum if you want to keep you vehicle light. We also reinforce the middle of the plate with a vertical rib in wide spans of our skid plates. Protect all your expensive undercarriage and don’t be stranded out in the middle of no where. You wont regret you have them once you hear that screech and scraping over the rocks. A must have. Made in the USA!


< Show Less

Showing 1–32 of 38 results

Jeep Wrangler JK Aluminum Oil Pan and Transmission Skid Plate

Made of 1/4" Aluminum Plate- 26# Available in  3/16" Steel- 42# Oil drain access with V catch to keep oil spots off your garage floor Includes Slide Washers Uses factory bolt locations Made in the USA Now that you have your ultimate off road 4 wheel drive vehicle,...

$542.00 – $579.00 Select optionsSelect options

Jeep Wrangler JK Oil Pan and Transmission Skid Plate

  • Made of 3/16" Steel Plate- 38#
  • Available in  1/4" Aluminum- 26# (Part # JKOPSPALU)
  • Oil drain access with V catch to keep oil spots off your garage floor
  • Includes Slide Washers
  • Uses factory bolt locations
  • Made in the USA

Jeep Wrangler JL Oil Pan / Transmission Skid Plate (3.6L)

Made of 3/16" Steel Plate- 38#.  Available in  1/4" Aluminum- 26# (Part # JKOPSPALU). Oil drain access with V catch to keep oil spots off your garage floor. Includes Slide Washers Uses factory bolt locations. Made in the USA Now that you have your ultimate off road 4...

Jeep Wrangler JL Oil Pan / Transmission Skid Plate (3.6L) (Aluminum)

Made of 1/4" Aluminum Plate- 26#.  Available in of 3/16" Steel Plate-38#    (Part # JLOPSP). Oil drain access with V catch to keep oil spots off your garage floor. Includes Slide Washers Uses factory bolt locations. Made in the USA Keep it light and protect your Jeep Wranglers JL's...

Jeep Wrangler JL Oil Pan / Transmission Skid Plate for 2 Door (3.6L)

Made of 3/16" Steel Plate- 47#. Available in  1/4" Aluminum- 26# (Part # JKOPSP2DALU2D). Oil drain access with V catch to keep oil spots off your garage floor. Includes Slide Washers Uses factory bolt locations. Made in the USA Now that you have your ultimate off road 4...

Jeep Wrangler JL Oil Pan / Transmission Skid Plate for 2 Door (3.6L) (Aluminum)

Made of 1/4" Aluminum Plate- 26#.  Available in of 3/16" Steel Plate-38#    (Part # JLOPSP). Oil drain access with V catch to keep oil spots off your garage floor. Includes Slide Washers Uses factory bolt locations. Made in the USA Keep it light and protect your Jeep Wranglers JL's...

JK Evap Skid Plate ('07-'11 JK)

Protect that expensive evap box while grinding over those rocks with M.O.R.E.'s evap skid plate! Laser cut out of 3/16" plate steel and powder coated black for a long durable finish. Fits 2007-2011 Jeep JKs.

JK Evap Skid Plate ('12+ JK)

Protect that expensive evap box while grinding over those rocks with M.O.R.E.'s evap skid plate! Laser cut out of 3/16" plate steel and powder coated black for a long durable finish. Fits 2012+ Jeep JKs.

JK Front Skid Plate ('07-'12 JK)

This JK front skid plate bolts on to your 2007-2012 Jeep Wrangler and is designed to protect your electronic sway bar disconnect and your steering components. Our front skid plate is made out of 3/16" plate steel and powder coated black. Easy bolt-on install.

JK Muffler Skid Plate ('07+ JK)

M.O.R.E.'s muffler skid plate will protect your JK from anything coming your way on the trails! Manufactured out of 3/16" steel plate and powder coated black, this product is truly rock proof! The muffler skid plate will fit on any Jeep Wrangler JK 2007 and newer with the...

JK Transfer Case Skid Plate ('07+ JK)

This add-on skid plate solves the problem, and offers up some affordable yet serious protection for your 2007+ JK Wrangler! Made out of 3/16" steel plate 27# M.O.R.E. has been proudly manufacturing Jeep armor and off-road protection parts for the last 35+ years. While the factory JK skid...

JL Evap Canister (Aluminum)

Keep it light but yet protect that expensive evap canister while grinding over those rocks with M.O.R.E.'s evap skid plate! Laser cut out of 3/16" aluminum plate. Fits 2018-current Jeep JL models. 

JL Evap Canister Shield

Cover your expensive evap canister with our JLECS18 evap canister shield. Although Jeep did a good job on the JL by downsizing the evap canister and mounting it up high, it is still vulnerable to sticks and brush. Our evap canister shield is a simple, effective solution to...

JL Front Skid Plate

Jeep JL 2018 and up Front Skid Plate.  17#  Cover your expensive electronic swaybar disconnect motor with our Heavy Duty Skid Plate made from 3/16" plate. Our front skid plate replaces the stock shield made from 16 gauge(.062") material. Easy bolt on installation requires no drilling. You can...

JL Front Skid Plate for Electronic Swaybar Disconnect (Aluminum)

Keep it light with this Jeep Wrangler JL aluminum front skid plate bolts on to your 2018-currrent Jeep Wrangler and is designed to protect your electronic sway bar disconnect and your steering components.  6#  Our front skid plate is made out of 1/4" aluminum plate.  Easy bolt-on install....

JL Gas Tank Skid Plate

Jeep JL 2018 to current Gas Tank Skid Plate for 4 door unlimited. 65#  Protect your gas tank by covering the factories very thin .074 thick skid plate using our JLGTSPUL  made out of 3/16" steel plate. Can be mounted alone or bundled together with our JL Oil...

JL Gas Tank Skid Plate for 2 Door

Jeep JL 2018 to current Gas Tank Skid Plate for 2 door. 56#.  Protect your gas tank by covering the factories very thin .074 thick skid plate using our JLGTSPUL  made out of 3/16"  plate. Can be mounted alone or bundled together with our JL Oil Pan /...

JL Transfer Case Skid Plate

Some of the factory JL skid plate is more than adequate to do the job, but the transfer case was left exposed and vulnerable from the factory. 25#  This add-on skid plate solves the problem, and offers up some affordable yet serious protection for your 2018 and up...

JL Transfer Case Skid Plate (Aluminum)

Some of the factory JL skid plate is more than adequate to do the job, but the transfer case was left exposed and vulnerable from the factory. 11#  This add-on skid plate solves the problem, and offers up some affordable yet serious protection for your 2018 and up...

JL Transfer Case Skid Plate for 2 Door

Some of the factory JL skid plate is more than adequate to do the job, but the transfer case was left exposed and vulnerable from the factory.  25#  This add-on skid plate solves the problem, and offers up some affordable yet serious protection for your 2018 and up...

JL Transfer Case Skid Plate for 2 Door (Aluminum)

Some of the factory JL skid plate is more than adequate to do the job, but the transfer case was left exposed and vulnerable from the factory. 11#  This add-on skid plate solves the problem, and offers up some affordable yet serious protection for your 2018 and up...

TJ Oil Pan / Transmission Skid Plate ('03-'06) (4.0L)

Made of 3/16" Steel Plate- 35#.  Oil drain access with V catch to keep oil spots off your garage floor. Uses factory bolt locations. Made in the USA Available for  2003-06 TJ and 2004-06 LJ   Protect your TJ's oil pan and transmission with M.O.R.E.'s combination skid plate! This...

TJ Oil Pan / Transmission Skid Plate ('97-'02) (4.0L)

Made of 3/16" Steel Plate- 35#.  Oil drain access with V catch to keep oil spots off your garage floor. Uses factory bolt locations. Made in the USA Available for TJ 2003-2006   Go further on the trails and rocks!! Protect your TJ's oil pan and transmission with...

TJ Steering Box Skid Plate ('97-'06 TJ)

Protect your steering box for your 1997-2006 Jeep TJ. Manufactured in the USA using 3/16" plate, powder coated black. Bolt-on application for full steering box protection! Hardware included.

Toyota 4Runner Gen 5 Front Skid Plate (Aluminum)

Protect that expensive oil pan repair with this 1/4" Aluminum front skid plate for Gen 5 (2009-Current) 4 Runners. Don’t rely on the factory .050 thick sheet metal skid, it just is not enough. Easy access door for oil changes. Life time guarantee. Easy install. Also available in...

$494.00 – $559.00 Select optionsSelect options

Toyota 4Runner Gen 5 Front Skid Plate (Steel)

Protect that expensive oil pan repair with this 3/16" Steel front skid plate for Gen 5 (2009-Current) 4 Runners. Don’t rely on the factory .050 thick sheet metal skid, it just is not enough. Easy access door for oil changes. Life time guarantee. Easy install. Also available in...

Toyota 4Runner Gen 5 Middle Transmission Skid Plate (Aluminum)

Protect that expensive tranmission oil pan repair with this 1/4" aluminum middle skid plate for Gen 5 4runners. Don’t rely on the factory .050 thick sheet metal skid, it is not enough. Lifetime guarantee. Easy install. Powder coated black. Available in aluminum or steel.

$369.56 – $434.56 Select optionsSelect options

Toyota 4Runner Gen 5 Middle Transmission Skid Plate (Steel)

Protect that expensive transmission oil pan repair with this 3/16" steel middle skid plate for Toyota 4runners Gen 5 . Don’t rely on the factory .050 thick sheet metal skid, it is not enough. Lifetime guarantee. Easy install. Powder coated black. Also available in aluminum.  

Toyota 4Runner Gen 5 Rear Transfer Case Skid Plate (Aluminum)

Protection from an expensive transfer case repair with this 1/4" aluminum transfer case skid plate for 4 Runners Gen 5. Don’t rely on the factory mini skid plate. Lifetime guarantee. Easy install.  Bare Aluminum or Grey Powder Coat Bare Aluminum will have some scratches from the manufacturing process...

$341.41 – $406.41 Select optionsSelect options

Toyota 4Runner Gen 5 Rear Transfer Case Skid Plate (Steel)

Protection from an expensive transfer case repair with this 3/16" steel transfer case skid plate for 4 Runners Gen 5. Don’t rely on the factory mini skid plate. Lifetime guarantee. Easy install.  Black Powder Coat

Toyota Tacoma Front Skid Plate (Aluminum)

  • 1/4" Aluminum
  • 29 lbs.
  • Reinforced ribs in front skid for those hard impacts
  • Bare Aluminum or Powder Coated Choices
  • Fits Gen 3 (2016-Current) and Gen 2 (2005-2015)

$558.73 – $623.73 Select optionsSelect options

Toyota Tacoma Front Skid Plate for 3/16" Steel

  • 3/16" Steel
  • 61 lbs.
  • Reinforced ribs in front skid for those hard impacts
  • Bare Aluminum or Powder Coated Choices
  • Fits Gen 3 (2016-Current) and Gen 2 (2005-2015)