"Bomb Proof" Motor Mount Conversion Kit Chevy LS (Gen III & IV) for Jeep Wrangler YJ (1987-95)
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
Transmission Mount for Jeep CJ (1966-86) Jeep Wrangler YJ (1987-95)
Do the shift levers "jump" all around in your Jeep? The transmission mount is probably worn out. Replace it with our Polyurethane Mount. It's not affected by oil, grease or road grime. It will tighten up the way your vehicle feels and it's the perfect complement with our...
Spring Shackle Hanger for Jeep Wrangler YJ (1987-95) Front
These heavy duty spring hangers are great direct replacement units for serious rock crawling and abuse. Reinforced and designed for stock springs, aftermarket lift springs, spring under axle, spring over axle. The YJ shackle hangers are a weld on heavy duty factory replacement (SR103).
Bracket: P/S Knuckle (87-95 YJ)
Bolt on, drilling and tapping of knuckle required. No hardware or instructions provided.
Polyurethane Bushing - 1"x1/2"x1-1/2"
1-1/2" x 3/4" Polyurethane Bushing x 1.450 Long used for 2-1/2" wide stock CJ rear springs at shackle end and shackle hanger. Sold each.
Dropped Pitman Arm for Jeep Wrangler YJ (1987-95)
Dropped Pitman Arm for 1987-1995 YJ, drilled for 5/8" bolt. Works with a 5/8" Heim Joint.
Steering Correction Kit: Stage 2 for Jeep Wrangler YJ (1987-95)
Tie rods and drag links made from 1"x.219 wall DOM tubing, threaded on both ends with wrench flats milled for ease of adjustment. Includes: Knuckle bracket (#9923), tie rod and drag link assembly (#9924), track bar mount (#9921), dropped pitman arm (#9922), and hardware kit (#9925). For use...
Lubeable Shackles for Jeep Wrangler YJ (1987-95) Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. The shackle bolts and inner bushing sleeves are drilled. The bolts are fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane bushings. Crimp-Loc nuts keep all parts...
Front Trac Bar Bracket for Jeep Wrangler YJ (1987-95)
M.O.R.E. has developed this revolutionary new steering system for Jeep® YJ Wranglers with spring over axle (S.O.A.) suspensions systems. This Steering Correction Kit fits only Jeep® YJ Wrangler vehicles 1987-1995, with stock model 30 front axles and a spring over axle suspension system. Minor grinding and drilling/taping of...
"Bomb Proof" Motor Mounts for Jeep Wrangler YJ (1991-95) with 4-cylinder engine
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
"Bomb Proof" Motor Mounts for Jeep Wrangler YJ (1991-95) with 4 cylinder & 1" Body Lift
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts are tremendous. With deep gearing, big tires, lockers, and mega torque, the stock...
"Bomb Proof" Block Brackets for Jeep Wrangler YJ (1991-95) with 4.0L engine
Now that rock crawling has become the favorite past time for Jeepers and we are putting our Jeeps in places that they were never designed to go, the stresses on the stock Jeep motor mounts and engine block are tremendous. With deep gearing, big tires, lockers, and mega...