Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
You can now replace the stock wimpy tie rod and drag link on your 1972-1986 Jeep® CJ with our Heavy-Duty Tie-Rod/Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end....
One of our top sellers. Designed for any axle housing, this 3/16" formed bracket has a 1/2" hole for the shock. This style mounts the shock with the bolt parallel to the housing tube. Inside dimension of the ears is 1-1/2". Center of Axle to center of 1/2" bolt...
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle. T500 Axle Plates for sold each. So order 2 per TB500 traction bar. FITS: CJ-7...
M.O.R.E. invented the one inch Jeep body lift "Puck" over 20 years ago. With the need to keep increasing tire sizes and a new generation of flexible suspension systems, it has become a necessity to move the body away from the frame for increased tire clearance. One inch...
Want to build your own or just replace existing bolts? Here you go. Sold individually.
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Want to build your own or just replace existing bolts? Here you go. Sold individually.
Do the shift levers "jump" all around in your Jeep? The transmission mount is probably worn out. Replace it with our Polyurethane Mount. It's not affected by oil, grease or road grime. It will tighten up the way your vehicle feels and it's the perfect complement with our...
Fits 2-1/2" axle diameter for YJ Dana 30 axle. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to. Manufactured in Colorado,...
This kit is built M.O.R.E. Bomb Proof. The Spring Perches and U-Bolt plates are made out of 1/4" plate steel. The shock mounts are made out of 3/16" plate, unheard of thickness for these parts. 5/8" holes in U-bolt plates for 9/16"-U bolts.