Steering Correction Kit: Stage 1 for Jeep Wrangler YJ (1987-95)
$572.66 – $601.55
Tie rods and drag links made from 1"x.219 wall DOM tubing, threaded on both ends with wrench flats milled for ease of adjustment. Includes: Knuckle bracket (#9923), tie rod and drag link assembly (#9924), and hardware kit (#9925). For use with spring over axle only.
Tie rods and drag links made from 1"x.219 wall DOM tubing, threaded on both ends with wrench flats milled for ease of adjustment.
Includes: Knuckle bracket (#9923), tie rod and drag link assembly (#9924), and hardware kit (#9925).
For use with spring over axle only.
| Finish | Bare steel, Zinc plating |
|---|
QUESTIONS & ANSWERS
Ask a Question-
Can this kit be used for spring under with a 6 inch lift?
Yes you can use it with the 6" lift. and have clearence
-
I understand a drop pitman arm is required... how much "drop" in the pitman arm is needed?
4" Here is the link to the one we sell.
Thanks
https://mountainoffroad.com/collections/all/products/dropped-pitman-arm-87-95-yj?_pos=1&_sid=7ebb28fa2&_ss=r -
What size rod ends are they?
5/8"
-
I need to get another bolt with spacers I believe for the pitman arm steering how can I get one?
Give us a cal at 877-533-7229 and we will get it right out.
-
can you use this with a sua application?
Phillip,
A lift under 4" will not work for a SUA application.
Thanks,
Scott -
Can this be used with Dana 44 or is it only Dana 30
Tim
This kit will only work on the Dana 30.
Thanks,
Scott -
IS THIS FOR SPRING OVER CONVERSION??
Dale, Yes it is. Thanks Scott
-
Can this be used with an ‘86 cj7 wide track, passenger drop Dana 30?
No it cannot the knuckles are completely differnt on the axles
-
Is this kit street legal?
We use Heim joints and each state is different in regards to using Heim joints. Check your local and state laws.
Thanks
