Axle Plates for our TB500 Traction Bar for Rear Axle for Jeep CJ7(1976-86) Jeep Wrangler YJ (1987-95)
$15.50
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle. T500 Axle Plates for sold each. So order 2 per TB500 traction bar. FITS: CJ-7...
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle.
T500 Axle Plates for sold each. So order 2 per TB500 traction bar.
FITS: CJ-7 and YJs (will not fit CJ-5). Welding required.
QUESTIONS & ANSWERS
Ask a Question-
Is the price for one or a pair?
This is for one and only one is needed
Thanks -
So this application is only for spring over set up.
Yes a spring over application only
-
Will it work on a '89 yj soa with 4 " springs
Yes it will
Thanks -
Can you custom make one? I’m running the motobilt stretch kit so I’m +6 in the rear or will this set up work?
Sorry we really cant do that since we havent proven any of the geometery of it.
Thanks -
I have a yj with a 8.8 rear end. Is there anyway to modify the plate that mounts to the axle to fit the larger diameter of the housing?
It wont take much grinding at all to open up the cope to fit around your axle
-
will this work for my yj with the stock dana 35?
Yes it will fit your YJ
Thanks -
Will this work on a CJ8 with a rear D44? Any problems with the transfer case cross member not being strong enough?
It will work but you will need to put a front cross memeber in.
-
will this mount on the passenger side of the diff, all of the pictures that I see of this system show it on the drivers side, which is where my muffler is?
Yes, It can mount either side of the diff pumpkin
-
Will this work on a 1979 cj7 quadra-trac, spring under with 4"lift springs? Where would the shackle end mount?
Mike,
Yes the TB500 will work for your application. You will need a crossmember for the shackle mount end to attach to.
Scott -
Can you provide all dimensions and measurements of this product?
This fits the YJ and CJ 7 wheel base. It is 30" center of the jonnie joint to center of bushing hole in the opposite end. The center of the axle to the center of the jonnie joint will be 32-1/4". The shackle hanger is 4" long. I hope this helps.
Thanks,
Scott -
Will this work for a spring under as well? I have 4" lift springs and they do wrap a little.
Mike,
It will work for a spring under as well.
Thanks,
Scott
