Oil Pan / Transmission Skid Plate for Jeep Wrangler JL with 2.0L Turbo (2018+)
$449.99 – $474.99
Protect your JL's oil pan and transmission with M.O.R.E.'s 3/16" thick combination skid plate! This skid plate is powder coated black and protects the vulnerable cross over tube of your exhaust system that will get crushed if you don't use our skid plate. Stock JLs do not come...
Protect your JL's oil pan and transmission with M.O.R.E.'s 3/16" thick combination skid plate! This skid plate is powder coated black and protects the vulnerable cross over tube of your exhaust system that will get crushed if you don't use our skid plate. Stock JLs do not come equipped with a oil or transmission skid plate from the factory, and our skid plate will prevent future undercarriage damage.
Fits 2018 to Current JL Wranglers 2 Door or 4 Door equipped with turbo 4-cylinder engines (2.0L) , the OEM Exhaust system, and stock front axle.
Any color other than Black may take up to 15 business days to ship.
If you have an aftermarket front axle in your jeep, it will need to be checked for clearance at full stuff on the drivers side. May need to clearance the fins on the center section.
| Color | Pure black, Tactical gray, Flame red, Desert sand, Special color |
|---|
QUESTIONS & ANSWERS
Ask a Question-
Hi does this one will fit on Jeep Wrangler 2.0 turbo unlimited with Clayton 3.5 lift or I need modification?
You should be ok but we havnt fit it for this specific application and dont know for sure.
Thanks -
The attached manual says "The JLOPSP Oil Pan/Tranny Skid Plate is designed to fit the following Jeep® vehicles: 2018 to Current JL Wranglers equipped with 6-cylinder engines (3.6L) and the OEM Exhaust system." So does this plate fit my 2021 Rubicon unlimited 4 door jeep with 2.0L engine? Also in figure 5 what is the name of the bracket that Point A and the other 2 bolts attach to?
Yes this skid will fit your 2.0 turbo 4 door UL. The instructions and mounting location will be the same it is the pan that is shaped different for clearances. The point A and other 2 holes are factory holes in the crossmember. No drilling required.
Thanks -
Will your engine/transmission skid work with a Teraflex 4.5" RT Long Arm suspension kit installed? My concern is the new reinforcement crossmember installed with the Teraflex kit.
Sorry we have not fit it for this application and dont know at this time.
Thanks, -
Will this fit 2021 4xe?
We have not fit one for the 4XE. This will not fit at this time.
Thanks, -
What is the overall weight of the skid plate?
45 steel and 33 aluminum
-
One of the questions here confirms compatibility on the 2-door. This is incorrect, as the skid plate will not be able to be installed due to the gas tank. See: https://www.jlwranglerforums.com/forum/threads/m-o-r-e-2-door-2-0-incompatibility.77123/
It will fit for the 2 door. It is narrow enough and will miss the gas tank
-
Will this fit a 2021 JL 2 door with the 2.0 engine?
Yes this will work for both 2 door and 4 door
-
Can this be left on for daily driving use without overheat the transmission or other important parts?
Yes, You will have no problems with over heating.
Thanks, -
How much lower will this hang down
It doesnt hang down any further than the transmission cross bar
-
Dies thus work with a rubicon
Yes this will work with your Rubicon
Thanks -
Does it will work with stock Sahara suspension?
Yes
-
Does this work on the JL 4 door 2.0 turbo?
Yes, This will fit your 4 door version.
