5/8 Rod End Spacer
Spacers provide room between the heim joint and mounting surface to allow the heim its full range of travel. Required in most heim joint applications, spacers prevent heim joint from binding against mount surfaces and damaging the components. Spacers can also be used to adjust the clearance between...
5/8"-18 Left Hand Thread Jam Nut
5/8"-18 Left Hand Thread Jam Nut
5/8"-18 Right Hand Thread Jam Nut
5/8"-18 Right Hand Thread Jam Nut
9/16" Bolt Zerk Protector
Tired of breaking the grease zerk off your bolts? We have the answer with our new "Zerk Protectors" for greasable shackles. Sold individually.
Aluminum bushing for Shackle Reversal System Front Bracket (87-95 YJ)
These are replacement aluminum bushings for Shackle Reversal System Front Bracket (87-95 YJ). Rather you are moving your shackle reversal system to a new frame or just somehow wore the bushings out. The aluminum bushings are sold individually. Below are installation instructions to 8795-50 and 8795-5.
Axle Off-Set Plate for 2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Axle Off-Set Plate for 2-1/2" Wide Springs
Now you can move the axle on the leaf springs with out major modifications. Use these axle off-set plates to relocate the housing either 3/4€ or 1€ forward or back depending on which hole you choose. The only other part that needs to be re-drilled is the U-bolt...
Axle Plates for our TB500 Traction Bar for Rear Axle for Jeep CJ7(1976-86) Jeep Wrangler YJ (1987-95)
Do you already have our TB500 and want to install it onto a new axle? Then the T500 axle plates are just what you need to install the TB500 on a new axle. T500 Axle Plates for sold each. So order 2 per TB500 traction bar. FITS: CJ-7...
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Boomerang Shackle for Jeep Wrangler YJ (1987-95) & CJ (1976-86) with Military Springs Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Boomerang Shackle HD 9/16" Bolts for Jeep Wrangler YJ (1987-95) Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...
Boomerang Shackle HD 9/16" Bolts for Jeep Wrangler YJ (1987-95) with Military Wrap Springs Front or Rear
M.O.R.E. Lubeable Jeep Shackles are made from 3/8" thick steel. A thick walled center brace bolts in place with grade 5 hardware. The shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the drilled inner sleeves and the "channeled" black polyurethane...