Steering Link Kit: Drag Link for Jeep CJ (1972-81) Narrow Track
$210.46 – $224.21
You can now replace the stock wimpy drag link on your 1972-1986 Jeep® CJ with our Heavy Duty Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end. The rod...
You can now replace the stock wimpy drag link on your 1972-1986 Jeep® CJ with our Heavy Duty Drag-link Kit. Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end. The rod ends are race-car quality, Teflon®/Kevlar® lined, self-lubricating and the alloy steel heat treated body is plated for durability. Rods will mount over or under the knuckles, and you must drill the stock tapered hole to a straight 5/8" hole.
- Jam nuts and grade-8 hardware are provided.
- Available in bare steel (no paint) or zinc plated.
Fits 1972-1981 CJs with Dana 30 front axle, narrow track.
| Finish | No zinc plating, Zinc plating |
|---|
QUESTIONS & ANSWERS
Ask a Question-
Would this fit the cj wide track. I swapped out my narrow track axle’s from a latter cj.
This 9929 will not work for your Wide Track. Our 9927 will work for your Wide Track will work for you. Here is the link to it.
https://mountainoffroad.com/collections/all/products/drag-link-82-86-cj?_pos=1&_sid=37c0f5e3c&_ss=r&variant=14538944282735 -
Do heim joints have more or less range of motion compared to stock tie rod ends.
The range of motion will probably be the same as facotry.
Thanks
