Oil Pan / Transmission Skid Plate for Jeep Gladiator JT with 3.6L (2020+)
Description
- Made of 3/16" Steel Plate- 54#. Available in 1/4" Aluminum- 36# (Part # JTOPSPALU).
- Oil drain access with V catch to keep oil spots off your garage floor.
- Includes Slide Washers
- Uses factory bolt locations.
- Made in the USA
Now that you have your ultimate off road 4 wheel drive vehicle, go even further in the rough and extreme terrain by protecting your expensive Jeep JT's oil pan and transmission with Mountain Off Road's 3/16" thick combination skid plate! 54 pounds. This skid plate is powder coated black and protects your oil pan along with the transmission and also the vulnerable cross over tube of your exhaust system that will get crushed if you don't use our skid plate. That is three expensive items this skid plate protects you from like rocks and obstacles that will do serious damage are on your under carriage.
This skid plate is powder coated black and protects the vulnerable cross over tube of your exhaust system that will get crushed if you don't use our skid plate. Stock JTs do not come equipped with a oil or transmission skid plate from the factory, and our skid plate will prevent future undercarriage damage. Fits 2020 to Current Jeep Gladiator JT equipped with 6-cylinder engines (3.6L) and the OEM Exhaust system.
We also suggest at least a 2.5" lift for clearance of the driveshaft.
If you have an aftermarket front axle in your jeep, it will need to be checked for clearance at full stuff on the drivers side. May need to clearance the fins on the center section.
Stock Jeep JTs with standard transmissions do not come equipped with a transmission skid plate from the factory. On automatic transmission equipped JTs, this will replace the thin and weak factory skid plate.
Powder Coated Black
Fits 2020+ Jeep Gladiator JTs
Description
- Made of 3/16" Steel Plate- 54#. Available in 1/4" Aluminum- 36# (Part # JTOPSPALU).
- Oil drain access with V catch to keep oil spots off your garage floor.
- Includes Slide Washers
- Uses factory bolt locations.
- Made in the USA
Now that you have your ultimate off road 4 wheel drive vehicle, go even further in the rough and extreme terrain by protecting your expensive Jeep JT's oil pan and transmission with Mountain Off Road's 3/16" thick combination skid plate! 54 pounds. This skid plate is powder coated black and protects your oil pan along with the transmission and also the vulnerable cross over tube of your exhaust system that will get crushed if you don't use our skid plate. That is three expensive items this skid plate protects you from like rocks and obstacles that will do serious damage are on your under carriage.
This skid plate is powder coated black and protects the vulnerable cross over tube of your exhaust system that will get crushed if you don't use our skid plate. Stock JTs do not come equipped with a oil or transmission skid plate from the factory, and our skid plate will prevent future undercarriage damage. Fits 2020 to Current Jeep Gladiator JT equipped with 6-cylinder engines (3.6L) and the OEM Exhaust system.
We also suggest at least a 2.5" lift for clearance of the driveshaft.
If you have an aftermarket front axle in your jeep, it will need to be checked for clearance at full stuff on the drivers side. May need to clearance the fins on the center section.
Stock Jeep JTs with standard transmissions do not come equipped with a transmission skid plate from the factory. On automatic transmission equipped JTs, this will replace the thin and weak factory skid plate.
Powder Coated Black
Fits 2020+ Jeep Gladiator JTs